Operation; Maintenance; Legal Notice - AEG IWQ 121 Operation And Installation

re does not require an earth connection.
● The disconnection devices of the supply rating must enable the complete
disconnection in case of the category of overvoltage III
● The appliance may only be connected to a 1/N/PE 230V AC 50 Hz supply.
If the cordset is to be used we recommend to use a rubber coated one (type
H05RR-F) with at least a 2 x 1 mm2 section .
● The safety precautions usual in the country of use and the regulations of the
local electricity supply are to be observed. The appliance is fitted in the factory
with an all – pole switch providing a contact break distance of ≥ 3 mm.

5) Operation

● Pulling the switch the product gets in function. You can see from the front
viewing window the following symbols:
Product rating
230V 1200W
230V 1800W

6) Maintenance

● This product does not require any special maintenance.
● Clean the product with a dry cloth once every 6 months.
● If the product requires repairing, contact an authorised technical service cen-
tre.
● When replacing the power cable, use a 2x1,00mm2 H05RR-F HAR type. This
operation must be performed by qualified personnel and never by the end user
in order to avoid damaging the appliance and jeopardising personal safety.

7) Legal notice

12
OFF
OFF
Environment and recycling
Please help us to protect the environment by disposing of the
packaging in accordance with the national regulations for waste
processing.
Recycling of obsolete appliances
Appliances with this label must not be disposed off with the general
waste. They must be collected separately and disposed off accor-
ding to local regulations.
0 I
600W
600W
II III
1200W X
1200W 1800W