Power Management Modes - Dell S3219D User Manual

Power management modes

If you have VESA's DPM compliance graphic cards or software installed on your
computer, the monitor can automatically reduce its power consumption when not
in use. This is referred to as power save mode*. If the computer detects input from
the keyboard, mouse or other input devices, the monitor automatically resumes
functioning. The following table shows the power consumption and signaling of this
automatic power saving feature.
* Zero power consumption in off mode can only be achieved by disconnecting the
power cable from the monitor.
VESA Horizontal
Modes Sync
Normal Active
operation
Active-off Inactive
mode
Switch off -
Energy Star
P
ON
E
TEC
NOTE:
P : Power consumption of on mode as defined in Energy Star 7.0 version.
ON
: Total energy consumption in KWh as defined in Energy Star 7.0
E
TEC
version.
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components and
peripherals you ordered and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making
decisions about electrical tolerances or otherwise. No warranty as to accuracy or
completeness is expressed or implied.
The OSD functions only in the normal operation mode. When any button is pressed in the
Active-off mode, one of the following messages will be displayed:
Vertical Video
Sync
Active Active
Inactive Blanked
- -
35 W
109 Kwh
Power Power
Indicator Consumption
White 80 W (maximum)
40 W (typical)
White Less than 0.3 W
(Glowing )
Off Less than 0.3 W
Power Consumption
About your monitor │ 17