Safety Instructions; Product Description - Bosch KTS 250 Original Operating Instructions

"Important notes on and safety instructions for Bosch
Test equipment". These instructions must be carefully
studied prior to start-up, connection and operation of
the KTS 250 and must always be observed.
---Separator---
1.5 Warranty and liability
No modifications may be carried out on our products.
Our products may only be used with genuine accesso-
ries and genuine spare parts. Otherwise, all warranty
claims will be rendered null and void.
---Separator---

1.6 Safety instructions

All the pertinent safety instructions can be found
in the separate manual "Important notes on and
safety instructions for Bosch Test equipment".
These instructions must be carefully studied prior
to start-up, connection and operation of the
KTS 250 and must always be observed.
---Separator---
1.7 Other applicable documents
Important information and safety instructions for Bosch
Test equipment – 1 689 979 922
---Separator---
2. Guideline and standards
2.1 EMC
The KTS 250 satisfies the criteria of EMC directive
2014/30/EC.
The KTS 250 is a class/category-A product according to
EN 61 326-1. The KTS 250 may cause high-frequency
household interference (radio interference) so that in-
terference suppression may be necessary. In such ca-
ses, the operator may be required to take appropriate
action.
---Separator---
2.2 Open-source software (OSS)
For an overview of the open-source software licenses
for the KTS 250, see "Settings >> Legal notes".
---Separator---

3. Product description

3.1 Intended use
The KTS 250 is a battery-powered diagnostic device for
workshops that can be used for control unit diagnosis.
It is prohibited to pass it on to end consumers.
---Separator---
3.2 Foreseeable misuse
Misuse ( ) with corresponding intended use ( ):
 The KTS 250 is passed on to end consumers.
 The KTS 250 may only be operated by trained work-
shop personnel.
---Separator---
 The KTS 250 is operated by the driver of a vehicle
while driving.
 The KTS 250 may only be operated by trained and in-
structed passengers while driving.
---Separator---
Robert Bosch GmbH
Guideline and standards | KTS 250 | 9 | en
3.3 Scope of delivery
Denomination
KTS 250
Case
Power supply unit
USB connecting cable
OBD connection cable
WLAN USB adapter
Original operating instructions and related
documents
---Separator---
The order numbers are not part numbers. The or-
der numbers are used to identify the items inclu-
ded in the scope of delivery. Components that
can be ordered are identified as spare parts or
wearing parts.
---Separator---
3.4 KTS 250 overview
2
 1: KTS 250
(1) Power key
(2) TFT touchscreen
---Separator---
3.5 Symbols on the rating plate
Attention: general warning sign indicating
danger. Before commissioning, connecting
and using Bosch products, it is essential to
read the operating instructions and the safe-
ty instructions, in particular, carefully.
---Separator---
Dispose of used electrical and electronic de-
vices, including cables, accessories and bat-
teries, separately from household waste.
---Separator---
EU declaration of conformity
---Separator---
Order number
–
–
1 687 023 736
1 684 465 491
1 684 465 756
–
–
1
1 689 989 370 | 2018-08-01