2 x Batteries (Optional) 1 x FM Antenna (Optional) 1 x Operation Manual This operation manual supplies all the information that you need to have about your Tangent TNR-50. Please read this operation manual carefully before you start using the unit! ACCESSORIES...
ACCESSORIES Accessories CONTENTS Contents SAFETY PRECAUTIONS Safety precautions IMPORTANT SAFETY INSTRUCTIONS Important safety instructions IMPORTANT INFORMATION Important information CONNECTION Connection to the mains REMOTE CONTROL Installation of batteries Using the remote control Remote control functions FRONT PANEL AND CONNECTIONS Front panel Connections CONNECTION Audio connection layout...
WARNING: TO MINIMISE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE. DO NOT OPEN THE CABINET AS IT CONTAINS DANGEROUS VOLTAGE. ONLY QUALIFIED TECHNICIANS ARE ALLOWED TO CARRY OUT REPAIR AND SERVICE. CAUTION: If the plug of the power cord needs to be replaced, it is important that the replacement is identical to the plug to be replaced, or that the new plug has been recommended by...
IMPORTANT SAFETY INSTRUCTIONS WARNING: IT IS IMPORTANT THAT YOU READ AND OBSERVE BOTH THE INSTRUCTIONS IN THIS MANUAL AND THE INSTRUCTIONS ON THE UNIT. KEEP THIS MANUAL FOR FUTURE REFERENCE. This unit was designed and manufactured with a view to providing maximum safety for the user. Incorrect use of the unit may cause electrical shock or fire.
Page 6
IMPORTANT SAFETY INSTRUCTIONS Lightning Unplug the unit for additional protection during thunder or when the unit is not used for prolonged periods. This will prevent damage to the unit from lightning and power surges. Penetration of objects and liquid Never push any foreign objects through the openings into the unit, as they may touch dangerous voltage points or short-circuit parts...
Handling instructions The top and back panel of the unit may become warm after prolonged use. This is not due to a defect. Turn off the power when the unit is not used. Protect the power cord Follow the instructions below to prevent abnormal operation, electrical shock, fire or personal injury: Hold the plug firmly when inserting it into the...
Connection to the mains ANTENNA Do not turn on the power before all connections have been made correctly. Check that all connections have been made correctly before turning on the power. Check that the mains voltage is 230-240V AC50Hz before turning on the power.
Do not position the unit behind tinted glass as it may reduce the maximum range of the remote control. REMOTE CONTROL Replace the cover. POWER FM/AM AUTOTUNE MEMORY PRESET TNR-50 FM/AM TUNER Infrared- Sensor TNR-50 POWER ST/MO PRESET TUNE AUTO TUNE...
Switches between MONO and STEREO on the FM band. Preset +/-: Changes up or down between stored stations. Power: Sets the TNR-50 in standby mode. AM and FM: Press these buttons to change between FM and AM. Autotune: (Auto Preset Search) Press this button once and the tuner will auto tune and store all available stations.
FRONT PANEL AND CONNECTIONS Front panel POWER TNR-50 FM/AM TUNER Mains switch: Used to interrupt the mains voltage. LED indicator: Lights green when the unit is turned on. Lights red when the unit is in standby mode or in operation.
FRONT PANEL AND CONNECTIONS Connections ANTENNA Stereo Output: Analogue stereo output. For connection to stereo amplifier or receiver with analogue input. Antenna : For connection of FM or AM antenna or for the communal antenna system. AC input : For connection of mains voltage. Make sure that the plug has been correctly inserted, and that the voltage corresponds to the text printed on the back panel of the cabinet.
Analog amplifier/receiver VOLUME POWER HEADPHONE PHONO TUNER AUX 1 AUX 2 FUNCTION AMP-50 AMPLIFIER This page only contains suggestions for connection of your Tangent TNR-50. Note that the accessories in the pictures on this page are not included in the supply.
Adjusting the antenna As it applies to all other radios, the sound quality depends on the signal strength of the antenna inputs. The position of the radio in relation to the transmitter thus directly influences the quality of the signal received.
If you wish to turn off the unit to avoid any power consumption, you must press the mains switch. POWER TNR-50 FM/AM TUNER Protect the environment and turn off the unit after use. RDS and FM/AM As this tuner can receive both normal FM radio and AM, it features a function that can switch between the two reception types.
The channel will then be stored on the current preset. OPERATION AND FUNCTIONS FM/AM AUTOTUNE MEMORY FM/AM AUTOTUNE MEMORY TUNING PRESET ST/MONO RESET TNR-50 POWER ST/MO PRESET TUNE AUTO TUNE MEMO TUNING PRESET ST/MONO RESET TNR-50 POWER...
This tuner can be reset. This is used to delete channel stored in the unit. Press the RESET button on the front panel to reset the unit. OPERATION AND FUNCTIONS FM/AM AUTOTUNE MEMORY FM/AM AUTOTUNE MEMORY TUNING PRESET ST/MONO RESET TNR-50 POWER ST/MO PRESET TUNE AUTO TUNE MEMO TUNING PRESET ST/MONO RESET TNR-50 POWER...
- Incorrect connection to the amplifier. - No loudspeakers have been connected to the amplifier. - The TNR-50 has not found any stations. - The TNR-50 has not found any stations. - The selected station does not broadcast any information.
Technical data RF section: Tuner bands Sensitivity Display: Presets Audio outputs Voltage and power consumption Dimensions (WxDxH) Weight We reserve the right to change the technical data and the design of the product without notice as a result of further development. TECHNICAL DATA 87.5-108.0MHz 522-1620KHz...
Page 20
Service hotline +45 9641 1599 For further information please visit our website: www.tangent-audio.com Item no. 40427...