Updating Recovery Partition; Creating A Bootable Usb Stick - Bosch DCU 220 Repair Instructions

4.3

Updating Recovery Partition

The system and the recovery partition (HDI) of DCU 220
can be updated manually to rectify errors that occur.
For this purpose, an up-to-date system image is made
available regularly. A bootable USB stick must be used
to carry out the installation.
i
The updating process should be carried out, if errors
that can be rectified with a new image occur in the
installed system.
i
The updating of Recovery Partition (HDI) is manda-
torily linked with a subsequent restoration (Recov-
ery).
4.3.1

Creating a bootable USB stick

!
The updated version of the BoschHDIDiskBootMaker
software must always be used.
!
During the process of creation all the existing data
on the USB stick will be deleted. Required data must
be backed up beforehand.
i
A USB stick with at least 32 GB storage capacity is
required.
1. Download the BoschHDIDiskBootMaker software
from
http://upm.bosch.com/DCU220/BoschHDIDiskBootMaker.zip
2. Unzip the zip file at a desired location with enough
free storage capacity (e. g. Desktop or My Docu-
ments).
 This creates a folder and an executable file:
3. Connect the USB stick.
4. Execute the software BoschHDIDiskBootMakerX.
XX.exe with a double click.
Robert Bosch GmbH
5. In STEP1, select the appropriate USB stick.
6. In STEP2, specify the path to the "Bootable Source
folder".
i
If the executable file and the "Bootable Source
folder" are in the same directory, the software will
automatically select the correct path.
7. Select <Build> to start the process.
 If the process is completed, the message "De-
ploying successfully" appears.
8. Select <Exit> to exit the software.
"
The USB stick is now converted into a bootable USB
stick.
!
The USB stick is now bootable, but it does not con-
. tain any image and therefore no system data. In this
state, the USB stick is not yet suitable for installa-
tion.
| DCU 220 | 23 en
|
1 689 975 264 2015-06-02