JVC KD-APD58 Instructions Manual page 52

Symptoms
• Tracks do not play back in the order you
have intended them to play.
• Elapsed playing time is not correct.
• "PLEASE" and "EJECT" appear alternately
on the display.
• Correct characters are not displayed (e.g.
album name).
• The iPod does not turn on or does not
work.
• The sound is distorted.
• "NO IPOD" appears on the display.
• Playback stops.
• No sound can be heard when connecting
an iPod nano.
• "NO FILES" appears on the display.
• "RESET 1" – "RESET 7" appears on the
display.
• "RESET 8" appears on the display.
• The iPod's controls do not work after
disconnecting from this unit.
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
• iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
24
All manuals and user guides at all-guides.com
Playback order is determined when the files are recorded.
This sometimes occurs during play. This is caused by how
the tracks are recorded on the disc.
Insert a disc that contains MP3/WMA tracks.
This unit can only display letters (upper case), numbers,
and a limited number of symbols.
• Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
Deactivate the equalizer either on the unit or the iPod.
• Check the connecting cable and its connection.
• Charge the battery.
The headphones are disconnected during playback. Turn
off the unit's power and turn it on again.
• Disconnect the headphones from the iPod nano.
• Update the firmware version of the iPod nano.
No tracks are stored. Import tracks to the iPod.
Reconnect the iPod.
Check the connecting cable and its connection.
Reset the iPod.
Remedies/Causes