Watercraft Operation Modes; Low Rpm Mode - Yamaha WaveRunner VXS 2014 Owner's/Operator's Manual

EJU40001

Watercraft operation modes

EJU41961

Low RPM Mode

The Low RPM Mode is a function that limits
the maximum engine speed to approximately
70% of the maximum engine speed in the
normal mode.
The Low RPM Mode can only be activated
and deactivated by operating the remote
control transmitter that is included with this
watercraft. (See page 25 for information on
the remote control transmitter.)
1 Remote control transmitter
TIP:
The Low RPM Mode can only be activated
when the engine is stopped in the unlock
mode of the Yamaha Security System.
Activating and deactivating the Low RPM
Mode
Activation of the Low RPM Mode will be con-
firmed by the number of beeps when the re-
mote control transmitter is operated, and by
the "L-MODE" indicator light of the multifunc-
tion information center. (See page 33 for in-
formation on the multifunction information
center.)
Watercraft operation
Number of Low RPM Mode
beeps
TIP:
If the remote control transmitter is operated
while the multifunction information center is
in the standby state, the center performs the
initial operation, and then the setting is se-
lected.
To activate the Low RPM Mode:
Push the "L-Mode" (unlock) button on the re-
mote control transmitter for more than 4 sec-
onds. Once the beeper sounds three times
and the "SECURITY" indicator light blinks
three times, then comes on, the "L-MODE"
indicator light comes on and the Low RPM
Mode is activated.
TIP:
If the Low RPM Mode is activated immediate-
ly after the information display turns off, the
"L-MODE" indicator light will not come on.
"L-MO-
DE" indi-
operation cator
light
Comes
Activated
Deactivated Goes off
on
31