Important safety instructions will be identified by the following safety symbol: Failure to comply with the instructions in this manual may result in serious injury or death. For additional assistance, contact any local authorized Tanaka dealer or contact Tanaka USA at 1-888-482- 6252.
OWNER’S MANUAL SAFETY INSTRUCTIONS PRODUCT SAFETY 1. Read and understand this Owner’s/Operator’s Manual before using this product. Be thoroughly familiar with the proper use of this equipment. 2. Make sure the product is correctly assembled and installed prior to use. 3.
OWNER’S MANUAL SAFETY INSTRUCTIONS AWARENESS OF WORK ENVIRONMENT 1. Inspect your work area before you begin. Remove objects such as broken glass, nails, wire and rocks which can become dangerous projectiles if thrown. Remove string, rope or similar materials which can become entangled in the rotating drum.
Page 5
Then push the drive shaft all of the way in. 4. All Tanaka trimmers use a locator screw to properly position the gear case, (in addition to the pinch bolt which tightens the gear case to the shaft).
OPERATING INSTRUCTIONS BREAK-IN The Power Sweeper operates best when the fins quickly slide or skim the surface being swept. New or replacement sweeper belts will tend to grip or drag on hard surfaces, and should be fully broken in prior to actual operation.
OWNER’S MANUAL MAINTENANCE - 300 HOURS GEARCASE LUBRICATION The gearcase should be filled with 60cc (2.0 fl.oz.) of Mobil SHC634 Synthetic Gear Oil. A maximum of 75 - 80cc can be used, but never exceed 80cc. Operation with excessive oil level will result in high operating temperatures.
Page 8
OWNER’S MANUAL For more information on this product including a complete illustrated parts list, go to www.tanaka-usa.com...