Transportation, Storage And Disposal - Husqvarna ST 424 Operator's Manual

Hide thumbs

Advertisement

Table of Contents
Problem
Loss of traction drive/
slowing of drive speed
Loss of snow discharge
or slowing of snow dis-
charge
The lights are not on (if
so equipped)
The chute rotator is diffi-
cult to move
The product turns to one
side

Transportation, storage and disposal

Transportation and storage
For storage and transportation of the product and
fuel, make sure that there are no leaks or fumes.
Sparks or open flames, for example from
electrical devices or boilers, can start a fire.
Always use approved containers for storage and
transportation of fuel.
Empty the fuel tank before you put the product in
storage for a long period of time. Discard the fuel
at an applicable disposal location
876 - 003 -
Possible cause
The belt slips.
The belt is worn.
The belt is off the pulley.
The chute deflector is clogged.
Foreign objects clog the augers.
The shear pin is broken.
Excessive snow and ice build up in between
continous track components.
The engine is not running.
The cable connection is loose.
The LED is burnt out.
The fuse is blown.
There is debris in the chute rotator mecha-
nism.
The cables are kinked or damaged.
The release cable needs adjustment.
The tire pressure is not equal.
The product drives with only one wheel.
Uneven sled adjustment.
Uneven skid plates adjustment.
Adjust the cable. Adjust the belt.
Check / replace the belt. Adjust the
pulley.
Check / reinstall the belt. Adjust
the pulley.
Clean the chute deflector.
Remove the debris or the foreign
object from the augers.
Replace the broken shear pin.
Remove snow and ice build up
from in between continous track
components.
Start the engine.
Do a check of the cable connec-
tions at the engine and the lights.
Replace the LED light module. In-
dividual LEDs can not be replaced.
Replace the fuse. Make sure that
there is no short circuit.
Clean the internal parts of the
chute rotator mechanism.
Make sure that the cables are not
kinked. Replace the cables that
are damaged.
Adjust the release cable.
Adjust the tire pressure and fill the
tire.
Inspect the tire lock pin.
Adjust the skid plates and the
sledge.
Adjust the skid plates and the
sledge.
Safely attach the product during transportation to
prevent damage and accidents.
Keep the product in a locked area to prevent
access for children or persons that are not
approved.
Keep the product in a dry and frost free area.
Charge the battery during long-term storage.
Examine and clean the battery terminals before
long-term storage.
Solution
27

Hide quick links:

Advertisement

Table of Contents
loading

  Also See for Husqvarna ST 424

  Related Manuals for Husqvarna ST 424

This manual is also suitable for:

St 427St 430St 424tSt 430tSt 427t

Table of Contents