Page 1
ELECTRIC CONVEYOR TOASTER OWNER’S MANUAL BCT2 SAVE THESE INSTRUCTIONS This manual contains important safety understand the contents of this manual, please information concerning the maintenance, use bring it to the attention of your supervisor. Do and operation of this product. Failure to follow...
Owner Information…………………………………………………………………..1 General……………………………………………………………………………..1 Warranty Information………………………………………………………………1 Important Safety Information………………………………………………………..2 Installation………………………………………………………………………….….4 Unpacking….…………………………………………………………………...…..4 Location….……………………………………………………………………….…4 Set-up...……………………………………………….………………………….….5 Toast Feed Ramp……………………………..……………………………………..5 Front/Rear Discharge………………………..……………………………………..6 Operation……………………………………………………………………………..6 For Model Equpped With Rocker Switch……………………………………….….6 Power Save Mode……………………………………………………………….…..7 Maintenance………………………………………………………………...…………7 General……………………………………………………………………………….7 Cleaning……………………………………………………………………………...7 Caution……………………………………………………………………………….8 General This Electric Conveyor Toaster is specially designed to speed the toasting operation. Products for toasting pass through a heating chamber for rapid and thorough toasting of products.
damage only. This Electric Conveyor Toaster is a product of extensive research and field testing. The materials used were selected for maximum durability, attractive appearance and optimum performance. Every unit is thoroughly inspected and tested prior to shipment. IMPORTANT! Keep these instructions for future reference. If the unit changes ownership, be sure this manual accompanies the equipment.
Page 4
Allow a minimum of 1″(3cm) clearance along the sides. Allow a clearance of 12″(31cm) along the front and rear discharge to ensure proper operation and safety. To prevent any injury or damage do not pull unit by power cord To prevent any injury, discontinue use if power cord is frayed or worn. Locate the unit at the proper counter height, in an area that is convenient for use.
UNPACKING 1. Remove unit and all packing materails from shipping carton. 2. Open the large box. Remove all packing materials and protective covering from the unit and parts. 3. Remove tape from discharge chute, crumb tray and toast collector pan. If unit is not level, use 9/16″(14cm) open-end wrench to adjust the foot of each leg until unit is level.
SET-UP CAUTION Unit is not weatherproof. For safe and proper operation locate the unit indoors where the ambient air temperature is a minimum of 70 F(21℃) and a maximum of 85 F(25℃). CAUTION The toasting of coated or buttered products such as garlic bread, cheese sandwiches and sweet rools is NOT recommended.
CAUTION To avoid any injury, do not remove the crumb tray for cleaning until toaster is cool. FRONT/REAR DISCHARGE The toaster can be configured to discharge in the front or rear. User can pull up the rear discharge door for front discharge and push down the rear discharge door for rear discharge. CAUTION To avoid any injury, do not remove the crumb tray for cleaning until toaster is cool.
5. This unit can be used for one sided toasting, such at buns and English Muffins by rotating the rotary switch to the top side heat only (buns). POWER SAVE MODE Selected this toaster can go into a Power Save Mode by turning the rotary selector into Power Save Mode.
Page 9
Toast Feed Ramp Press in the two wire spokes and remove guide form unit. Wipe clean with a soft, damp cloth or soak the guide in a mild solution of 1 cup ammonia and 1 gallon of water (227 milliliters and 3.785 liters).
Need help?
Do you have a question about the BCT2 and is the answer not in the manual?
Questions and answers