Cleaning The Sponge Filter; Cleaning Of Electronic Turbo Nozzle - Fakir HSA 800 XL Series User Manual

EN

Cleaning the Sponge Filter

Open the dust canister by turning it to the left and remove it by pulling it towards you (fig.
1). Remove the sponge filter on the bottom of the main body by turning it to the left (fig. 2).
Clean the sponge filter by shaking it. Once the cleaning is complete, replace the sponge
filter by turning it to the right. When the click is heard, the filter is placed in its compartment.
To place the dust canister in place, place the canister in the body and turn it to the right.
When the dust canister is seated in place, a click sounds.
Sponge Filter

Cleaning of Electronic Turbo Nozzle

Remove the electronic turbo nozzle by pressing the latch on the apparatus as seen in the
figure.
At the bottom of the turbo nozzle, open the brush lock by pushing the lug on the bottom left
and remove the lock. For cleaning, remove the roller brush and clean it. When placing the
roller brush, pay attention to the threads on the brush edges and push it into the slot until
you hear the click sound. Place the brush lock to meet the lug in the lower left corner of the
turbo brush and push down on the bottom of the lock. When the lock is seated in place, a
click sounds.
Once you are sure that the parts you have cleaned are completely dry, you can mount
them.
32