Symmetricom SyncServer S100 User Manual page 55

• Host name
• System (S100) location
Confirm the data that is in the fields. If it is not accurate, change it to the correct information.
Click Next.
System Tests dialog
You can skip the test by clicking Finish, or initiate the test by clicking Test Now.
The default is to test all the services, so unless you un-check them, they all will be tested. If
you do not use dial-up as backup, it will not be listed here nor will it be tested.
S100 User Guide – Rev. D – June 2005
Figure 3-36: System Testing options
2
3
5
47