Turning Off Your S100 - Symmetricom SyncServer S100 User Manual

3. Now, verify the S100's IP address. At the Unix command prompt, at the command line
(Figure
4. Open your web browser, enter the IP address in the browser Address field and
press<Enter>. The Configuration Wizard link appears. Use the Wizard to complete the
S100 configuration process.

Turning Off Your S100

Normal
If you have configured the unit correctly and it is running normally, select (Administrative
Menu) Administration>Shutdown/Reboot from the S100's web interface. The following screen
appears:
If you are using SSH or TTY, at the prompt type: shutdown -h now<Enter>.
S100 User Guide – Rev. D – June 2005
3-6), type IFCONFIG and press <Enter>. The following appears
Figure 3-10: Linux IP Confirmation Screen
Figure 3-11: S100 Shutdown Screen
(Figure 3-10).
2
3
5
29