Table of Contents
Advertisement
Administrator Log-In
On the System Status Screen, click the Administrator Log-In link. After the security alert,
the following dialog is displayed.
Enter the default user name,
recommend you change these settings as soon as possible.
(You may log off by clicking Log Out at the top of each screen in the interface. More about
logging off can be found in
System Status: Logged In
Once logged in, you see the System Status screen again except now it has more information.
In Versions, this information refers to the current software in the S100. In the NTP Host
Reachability, this example shows that the IP address was accessed eight times and provides
additional details.
S100 User Guide – Rev. D – June 2005
Figure 3-13: Logging In
, and default password,
admin
"Logging Off" on page
Configuration Wizard
Figure 3-14: Full System Status
symmetricom
85.)
2
. We strongly
3
5
31
Advertisement
Chapters
Table of Contents
