Usb Board - HP 340 G7 Maintenance And Service Manual

USB board

Table 5-13 USB board and cable descriptions and part numbers
Description
USB board
USB board cable
Before removing the USB board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the rubber feet (see
3. Remove the bottom cover (see
4. Remove the battery (see
To remove the USB board:
1. Disconnect the cable from the ZIF connector on the USB board (1)
2. Move the WLAN antenna cables that route over the USB board (2)
3. Remove the three Phillips M2.0 × 3.0 screws (3) that secure the USB board to the computer.
4. Remove the USB board from the computer (4).
Reverse this procedure to install the USB board.
(Preparation for disassembly on page
Computer feet on page
Bottom cover on page
Battery on page 31).
27).
29).
Component replacement procedures
Spare part number
L81415-001
L81411-001
27).
43