SYMPTOM
GLUE SHEET Lamp is flashing
No mosquitoes are collected on the
Glue Sheet.
When the adhesive glue remains on
clothes, skin, floor, etc.
SLEEP lamp is flashing.
SPECIFICATIONS
Power supply
Fan
Speed
Operation
Recommended Room Size
High density Plasmacluster ion recommended room size
Cord Length
Dimensions
Weight
*1 Size of a room which is appropriate for operating the unit at maximum fan speed.
• It indicates the space where a certain amount of dust particles can be removed in 30 minutes(-
JEM1467).
*2 Size of a room in which approximately 7000 ions can be measured per cubic centimeter in the
center of the room (at a height of approximately 1.2 meters from the floor) when the product is
placed next to a wall and run at the MED operation position.
Standby Power
FP-GM50Y_EN.indd
17
It's replacement timing of glue sheet.
Please exchange to new glue sheet.
Then, press the Mosquito Catcher button for 3 sec.
• Aren't windows or doors opened?
• Don't you set up in the place where the wind blows such as air-
conditioner or fan?
⇒ Try to relocate the unit.
• Wipe with cooking oil, then wash with soap and water.
• Fan motor error. Turn the power OFF. Wait one minute, and
then turn the power ON.
Fan Speed Adjustment
Rated Power
Fan Speed
In order to operate the electrical circuits while the power plug is inserted in the
wall outlet, this product consumes about 1.0W of standby power.
For energy saving, unplug the power cord when the unit is not in use.
REMEDY (not a malfunction)
220 V
MAX
51W
306m
3
/hour
186m
394mm(W)x281mm(D)x540mm(H)
E-17
50 Hz
MED
SLEEP
17W
4.0~6.0W
3
/hour
48~90m
3
/hour
~40m
2 *1
~23m
2 *2
2.0m
6.1kg
2016/10/19
15:02:54