Related Manuals for Sylvania SIP3019
Summary of Contents for Sylvania SIP3019
- Page 1 SERIES MODEL NO. SIP3019 CD MICRO SYSTEM DOCKING STATION FOR iPOD INSTRUCTION MANUAL ROCK SLEEP PLEASE READ BEFORE OPERATING THIS EQUIPMENT...
-
Page 2: Safety Instructions
SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVIC- ING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral trian- gle is intended to alert the user to the presence of uninsulated dan-... - Page 3 SAFETY INSTRUCTIONS Before using the unit, be sure to read all operat- ing instructions carefully . Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna.
- Page 4 SAFETY INSTRUCTIONS voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product. 17. OUTDOOR ANTENNA GROUNDING If an outside antenna is connected to the prod- uct, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
-
Page 5: Preparation For Use
PREPARATION FOR USE Power Sources Power the unit by connecting it to a standard AC outlet (120V ~ 60Hz) via the attached AC adaptor. Changing the Remote Battery WARNING: Danger of explosion if the remote control’s batteries are incorrectly installed. Replace only with the same or equivalent battery. -
Page 6: Location Of Controls
LOCATION OF CONTROLS iMode SERIES TIMER OPEN/CLOSE ROCK ROCK SLEEP SLEEP... - Page 7 LOCATION OF CONTROLS FEATURE DEFINED LCD – View the Time, iPod Indicator, and Radio Frequency through this Liquid Crystal Display. Backup Battery Compartment – For Clock Backup (1.5V AAA x 2pcs) CD DOOR – Open using the CD OPEN button. iPOD DOCKING STATION - SPEAKER JACK –...
-
Page 8: Location Of Remote Controls
LOCATION OF REMOTE CONTROLS FEATURE DEFINED R1 MUTE – Use mute the audio sound. R2 STANDBY – Press the standby button to turn the unit off or on. R3 MEMU/PROG /MEM/CLK SET – Press the button to program a loaded CD or to move backwards through the menus on a docked iPod. - Page 9 LOCATION OF REMOTE CONTROLS R11 REPEAT/M- BUTTON Press the Repeat button once to repeat an – individual song on a docked iPod or CD single track. Press the Repeat Button twice to repeat an album / play list on a docked iPod or entire CD. In radio mode, press the button cycle through saved radio stations in radio mode.
- Page 10 Included iPod Model Bracket...
-
Page 11: Operation
Setting the Clock 1. Press the STANDBY button to turn the unit off, then press and hold the CLK button. 2. Use the FWD/PEV buttons to select 12Hr or 24Hr clock, and press the CLK button to confirm the selection. 3. -
Page 12: Tuning The Am/Fm Radio
Playing a CD 1. Press the STANDBY button to turn the unit on. 2. Press the FUNCTION button and switch the unit to CD mode. 3. Press the OPEN/CLOSE button to open the CD door, insert a CD or CD-R/RW disc into the CD Drive and press the OPEN/CLOSE button to close the CD door. -
Page 13: Using The Auxiliary Input
Saving and Recall a Radio Station Memory 1. In radio mode, you select the radio station to storage in memory. 2. Press and hold the MEM button to begin saving the current radio station. 3. Press the FWD/PEV buttons to select a memory slot for the current radio station(P01~P10). -
Page 14: Care And Maintenance
Care and Maintenance Caring for Compact Discs a. Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the disc. Do not attach adhesive tape, stickers, etc. to the disc label. -
Page 15: Specifications
Power Requirement Frequency Range Radio Receiving: Power Consumption Specifications AM 530 - 1710 KHz 20 Watts... - Page 16 LIMITED PRODUCT WARRANTY This quality product is warranted to be free from manufacturer’s defects in material and workman-ship, provided that the unit is used under the normal operating conditions intended by the manufacturer. Should you have any problem with this product, please and it is highly recommended to visit our website at www.curtisint.com before you take any other steps as we have additional copies of instruction manuals, operating manuals and trouble shooting tips on our website which gives you the answer on most of the...