IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVIC- ING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral trian- gle is intended to alert the user to the presence of uninsulated dan-...
Page 3
IMPORTANT SAFETY INSTRUCTIONS Before using the unit, be sure to read all operat- ing instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna.
Page 4
IMPORTANT SAFETY INSTRUCTIONS 18. Object and liquid entry. Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product.
POWER SOURCE AC Operation: Unwind the AC power cord and extend it to its full length. Insert the small plug of the AC power cord to the unit. Insert the AC plug of AC Outlet the cord into any convenient 120V 60Hz household outlet.
BATTERY PRECAUTIONS: Follow these precautions when using a battery in this device: 1.Use only the size and type of battery specified. 2.Be sure to follow the correct polarity when installing the battery as indicated in the battery compartment. A reversed battery may cause damage to the device. 3.Do not mix different types of batteries together (e.g.
Control Definitions Standby Button Press the Standby Button to turn the unit on or off (Standby mode) CLOCK SET Button Press and hold this button then press the HOUR button at the same time to set hour. Press the MIN button to set minute.
Setting the Clock 1. Press and hold the CLOCK Set Button 2. While holding the CLOCK Set Button, press the Hour Button to adjust the hour and the Minute Button to adjust the minute. 3. When finished, release the CLOCK Set Button. Radio Operations: Press the Standby Button on the unit or Remote Control to power on the unit.
NOTES ON CLEANING: ~ Use a soft, dry cloth for cleaning. ~ For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth to wipe it dry. Do not use any type of solvent, such as thinner and benzene, as they may damage the surface of the unit.
LIMITED PRODUCT WARRANTY This quality product is warranted to be free from manufacturer’s defects in material and workman-ship, provided that the unit is used under the normal operating conditions intended by the manufacturer. Should you have any problem with this product, please and it is highly recommended to visit our website at www.curtisint.com before you take any other steps as we have additional copies of instruction manuals, operating manuals and trouble shooting tips on our website which gives you the answer on most of the...