Sylvania DULUX 20566 Product Information Bulletin

Product Information Bulletin
DULUX ® DT/E/C
4-Pin Amalgam Compact Fluorescent Lamps
SYLVANIA DULUX DT/E/C industry exclusive amalgam compact
fluorescent lamp is ideal for use in a wide range of high
temperature applications.
DULUX DT/E/C amalgam lamps are ideal for enclosed, exterior
and small fixtures. The lamps have improved amalgam
technology and higher temperature rated components. This
lamp has the next generation composite (metal/plastic) base cap
which has been designed to exceed IEC safety requirements.
System Comparison
Compact Fluorescent vs Incandescent
Lamp Type
150W Incandescent
DULUX DT/E/C
1. Based on $.10/kWh over 12,000 hours.
Application Information
Applications
Recessed ceiling fixtures, enclosed exterior fixtures
Industrial lighting
Showcase lighting
Wall sconces
Task lighting
Exit signs
Garden and walkway lighting
Fixtures
Contact your local fixture agent for available fixtures.
Ballast Information
Contact your OSRAM SYLVANIA representative for a list
of compatible operating systems.
CF045R1 3/08
• Improved high temperature performance
• Latest generation higher temperature rated
• Designed to exceed IEC safety requirements*
• Extended range of color temperatures:
• Operates on various ballast systems
• Less power consumption than incandescent of
• High luminous efficacy
• Long 12,000 hour average rated life
• Rare earth tri-phosphor with 82 CRI
* Regulations may vary. Check your local and state regulations.
Product Availability
Lamp
CF42 DT/E/C
Rated System
Lamp Life Lumens
750 hrs. 2740
12,000 hrs. 3200
Application Notes
1. 4-Pin lamps designed for electronic ballast operation.
2. Recommended for use with ballasts that operate the lamp
3. Minimum starting temperature depends on ballast.
4. Rule of thumb: to estimate the appropriate compact fluorescent
5. Equipment manufacturers are advised to consult ANSI and
– Maintains 90% lumens from 60°F to 175°F
ambient
composite (metal/plastic) base cap
3500K, 4100K and 5000K with improved
color consistency
– Flicker free start on electronic ballasts
– Compatible with QUICKTRONIC
comparable light output
– Reduces relamping requirement and
related cost
Wattage
42
System
Wattage
150W
46W
Not recommended for dimming.
in compliance with ANSI/IEC specifications.
lamp wattage, divide the incandescent wattage by 4.
IEC standards for the maximum allowable dimensions and
temperature to ensure compatibility with similar products.
® System CF
Rated Lumens
3200
System Energy 1
LPW Savings
18.5 –
70 $124.00