Sylvania 6900DTD Owner's Manual
  1. Manuals
  2. Brands
  3. Sylvania Manuals
  4. TV
  5. 6900DTD
  6. Owner's manual

Sylvania 6900DTD Owner's Manual

Atsc/ntsc stb
Hide thumbs Also See for 6900DTD:
Table of Contents

Advertisement

Quick Links

Download this manual
OWNER S
MANUAL
ATSC/NTSC STB
6900DTD
E
NERGY
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
If you need additional assistance for set-up or operating
after reading owner's manual, please call
TOLL FREE : 1 - 800 - 968-3429
Please read before using this equipment.
As an E
S
®
NERGY
TAR
Partner, our company has determined
that this product meets the E
S
®
guidelines for energy efficiency.
TAR
S
®
is a U.S. registered mark.
TAR
NERGY

Advertisement

Table of Contents
loading

Related Manuals for Sylvania 6900DTD

Summary of Contents for Sylvania 6900DTD

  • Page 1 OWNER S MANUAL ATSC/NTSC STB 6900DTD As an E Partner, our company has determined that this product meets the E NERGY INSTRUCCIONES EN ESPAÑOL INCLUIDAS. If you need additional assistance for set-up or operating after reading owner’s manual, please call TOLL FREE : 1 - 800 - 968-3429 Please read before using this equipment.

  • Page 2: Table Of Contents

    Table of Contents 1 Before Using ....Important Safeguards....Precautions ..... . Information on digital broadcasting .

  • Page 3: Before Using

    WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
  • Page 4 F IGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECT RICAL CODE NEC - NATI O NAL EL ECTRI CAL CO DE S2 8 9 8 A 13.Outdoor Antenna grounding-If an outside antenna or cable system is connected to this product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.

  • Page 5: Precautions

    LOCATION For safe operation and satisfactory performance of your this product, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. •...

  • Page 6: Information On Digital Broadcasting

    Before Using Information on digital broadcasting Receives both ATSC and NTSC Digital broadcasting is the most advanced format of broadcasting, employing a new technology for compression of audio and video signals which allows broadcasters to transmit digital signals using existing terrestrial systems.

  • Page 7: Major Features Of Stb

    Capable of receiving digital (ATSC*), analog (NTSC*), and cable (NTSC) broadcasts • Capable of receiving High Definition TV broadcasts • • Capable of receiving Dolby® digital 5.1 audio Alternate languages for OSD are available. • (English, Spanish, French) • Component video output jacks (Y/ Pb/ Pr) Sub-channels* are available through a single digital channel.

  • Page 8: Location Of Controls

    Before Using FRONT PANEL 1 POWER button: Turns STB on and off. 2 POWER indicator: Lights up while STB is on. NOTE: When turning the STB on, the power indicator will blink first and light up. When turning the STB off, the power indicator will blink first and go off. 3 Remote control sensor: Receives signals from your remote control and enables you to control STB from a distance.

  • Page 9: Rear Panel

    REAR PANEL 1 ANT. IN Jack: Use to connect an antenna to STB. 2 DIGITAL AUDIO (COAXIAL) Jack: Use to connect a decoder or an amplifier to STB with a digital coaxial cable. NOTE: You must use this jack and a Dolby® Digital receiver for Dolby® Digital 5.1 playback. 3 AUDIO R/ L Jacks: (2 pairs) Use to connect your TV, a stereo system or a VCR to STB with standard audio cables.

  • Page 10: Remote Control

    Before Using REMOTE CONTROL 1 POWER button: Turns STB on and off. 2 Number buttons: Use to input channel numbers and passwords, and to set time. 3 ENTER button: In SETUP menu, press to determine your selection. 4 CH buttons: o / p Press to change the channels up or down.

  • Page 11: Accessories

    Accessories You will find STB and the following accessories when unpacking the carton box of STB: 6900DTD Remote controller unit and AA batteries (x2) (PART No.: NE120UD) Owners manual (PART No.: 0EMN02308) A NOTE ABOUT RECYCLING This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.

  • Page 12: Reference To Setup Menu

    Before Using SETUP WIZARD ( Refer to page 25 through page 29. ) SETUP WIZARD SETUP WIZARD guides you through initial setup. "SETUP" "Create new setup" "QUIT" "Keep old setup" QUIT SETUP Language for screen (1/8) ( Refer to page 25. ) SETUP WIZARD 1/8 Channel scanning (2/8) ( Refer to page 26.

  • Page 13: Adjusting Antenna

    CHANNEL ( Refer to page 43, 46, 49, 51.) CHANNEL QUIT ADD/DELETE ANTENNA CHANNEL AUTOSCAN DISPLAY CLOCK DETAIL Adding channels / Deleting channels ( Refer to page 43, 46. ) ADD/DELETE QUIT CHANNEL DISPLAY CLOCK DETAIL Adjusting antenna ( Refer to page 49. ) ANTENNA QUIT CHANNEL...
  • Page 14 Before Using CLOCK ( Refer to page 59, 60, 62, 64. ) CLOCK 2002/ 1/31( THU ) 2 50PM QUIT TIME ZONE CHANNEL CENTRAL MANUAL DISPLAY AUTO CLOCK DETAIL Setting the clock (Daylight Savings Time) ( Refer to page 60. ) Setting the clock (Time Zone) ( Refer to page 60.
  • Page 15 DETAIL ( Refer to page 66, 69, 70, 71, 73, 77, 81, 84. ) DETAIL QUIT V-CHIP / CC CHANNEL MENU LANGUAGE ENGLISH DISPLAY CLOCK DETAIL Setting for V-CHIP/CC ( Refer to page 69. ) CHANNEL DISPLAY V-CHIP/CC password window ( Refer to page 70.

  • Page 16: Connections

    Connections Use a standard antenna cable to connect the wall jack to the ANT IN Jack on STB. STB connection to the antenna To the antenna WHEN CONNECTING TO CABLE BOX ALSO: Incoming cable signals To the antenna ANT. IN 1 Use a standard antenna cable to connect the wall jack to the ANT IN Jack on STB.
  • Page 17 When you connect the antenna cable to another device, be sure to use a splitter as shown below. Right Splitter ANT. IN Wrong ANT. IN CAUTION NOTE: Antenna, antenna cable and Splitter are not included. Antenna cable e.g.: Connection to VCR Antenna cables e.g.: Connection to VCR...

  • Page 18: Connections To Other Devices

    Connections Connections to other devices There will be various ways of connecting STB to other devices. Make your connection according to your choice of devices, screen format, and sound format. You will find some sample connections in the following pages. All jacks on STB will not need to be connected.
  • Page 19 1 Use a standard antenna cable to connect the wall jack to the ANT IN jack on STB. 2 Use a standard audio cable to connect the audio output jacks (L, R) of STB to the audio input jacks (L, R) on the TV.
  • Page 20 Connections STB connection using S-VIDEO output to SDTV 1 Use a standard antenna cable to connect the wall jack to the ANT IN jack on STB. 2 Use a standard audio cable to connect the audio output jacks (L, R) of STB to the audio input jacks (L, R) on the TV.
  • Page 21 STB connection using VIDEO output to SDTV 1 Use a standard antenna cable to connect the wall jack to the ANT. IN jack on STB. 2 Use a standard audio cable to connect the audio output jacks (L, R) of STB to the audio input jacks (L, R) on the TV.
  • Page 22 Connections STB connection to a standard stereo system STEREO COMPONENT 1 Use a standard antenna cable to connect the wall jack to the ANT. IN jack on STB. 2 Use a standard audio cable to connect the audio output jacks (L, R) on STB to the audio input jacks (L, R) on the stereo.
  • Page 23 STB connection to a decoder with Dolby Digital Digital Decoder Coaxial digital audio cable To Coaxial digital audio input jack 1 Use a standard antenna cable to connect the wall jack to the ANT. IN jack on STB. 2 Connect a coaxial digital audio cable (purchase locally) from DIGITAL AUDIO (COAXIAL) output jack on STB to a coaxial digital audio input jack on the digital decoder.
  • Page 24 Connections STB connection to TV and Video devices (VCR, DVD recorder, etc) e.g.: Connection to VCR To audio input jacks (L, R) To video input jack 1 Use a standard antenna cable to connect the wall jack to the ANT IN jack on STB. 2 Use a standard audio cable to connect the set of audio output jacks (L, R) on STB to the set of audio input jacks (L, R) on the VCR.

  • Page 25: Initial Setups (Setup Wizard)

    Initial setup SETUP WIZARD SETUP WIZARD is the very convenient menu for you to make the initial settings of STB. When STB is turned on for the first time after connecting the AC power cord, SETUP WIZARD is displayed on the screen automatically. You can complete the following items for the initial Setups through this menu.
  • Page 26 Initial Setups (Setup Wizard) 3 Select a desired language using navigation buttons, then press ENTER. The selected language will be activated. • SETUP WIZARD 2/8 will appear. • ETUP WIZARD 2/8 ow the system is scanning for channels. Digital SKIP 4 STB starts scanning channels.
  • Page 27 7 Select the desired time zone using navigation buttons, then press / s s / B B ENTER. SETUP WIZARD 5/8 will appear. • SETUP WIZARD 5/8 Enter current time. YEAR 2001 DATE TIME NOTE : Refer to “INFORMATION on Time Zones ” on page 8 Enter YEAR, DATE and TIME using o o / p p navigation buttons or number...
  • Page 28 Initial Setups (Setup Wizard) 9 Press ENTER when the cursor is on SET. Your settings will be activated. • SETUP WIZARD 6/8 will appear, then STB will • start searching channels with Automatic Clock Adjustments to keep the time correct. SETUP WIZARD 6/8 Select a channel for auto clock setting.
  • Page 29 11 Press ENTER. SETUP WIZARD 7/8 will appear. • SETUP WIZARD 7/8 Select screen ratio. 12 Select the desired screen ratio using navigation buttons, then press ENTER. SETUP WIZARD 8/8 will appear. • SETUP WIZARD 8/8 Select display mode. LETTERBOX ZOOM FULL NOTE:...

  • Page 30: Basic Operation

    Basic Operation Watching TV STB is capable of receiving analog (NTSC format) and digital (ATSC format) broadcasts. All available channels from any of these broadcast sources can be tuned in using the CH and number buttons on your remote control. Each channel number consists of a main channel number and a sub-channel number.
  • Page 31 When using number buttons (E.g., entering 26-1): 1. Enter the main channel number, press the “ button, then enter the sub-channel number. NOTE: Every channel number consists of a main channel and a sub-channel. Screen: Puffy the Vampire Slayer WWOR TV-Y ENGLISH MONAURAL 2:00PM- 3:00PM...
  • Page 32 Basic Operation When returning to the channel you were last watching: • STB will tune back in the channel you were last watching. About sub-channel broadcasting: There may be different programs being broadcast on sub-channels through a single channel from ATSC. You can watch each sub-channel program being broadcast by selecting one of the sub-channels.

  • Page 33: Channel Banner

    Channel banner The channel banner provides you with information on the channel you have selected. Basic Operation 1 Press INFO to display a channel banner. Channel information will appear in the channel • banner. Remote: Screen: Puffy the Vampire Slayer WWOR TV-Y ENGLISH STEREO...
  • Page 34 Basic Operation Components of Channel Banner Puffy the Vampire Slayer Program title Program rating TV-Y 2:00PM- 3:00PM Doublement Palace: Puffy takes a new job at a fast food restaurant Program description to make ends meet. Sarah Michelle Gellar, Nicholas Brendon, Alyson Hannigan, Elizabeth Anne Allen, Kari Rocha.

  • Page 35: Choosing Audio And Language

    Choosing audio and language When the channel you are tuning in provides alternate audio formats and languages, you can change to any alternate. When you are tuning in ATSC, language and format can be set at the same time through an audio-map. Audio map: (Only when tuning in ATSC) Audio format and language outputs from a broadcasting station are stored in an audio-map.
  • Page 36 Basic Operation 1 Press AUDIO button. Remote: When tuning in NTSC: The sequence will repeat as shown below when available. Screen: EPG not provided. MONAURAL MONAURAL STEREO (When available) When tuning in ATSC: The sequence will repeat according to audio-map when the AUDIO button is pressed.

  • Page 37: Picture Still

    Picture Still You can stop the picture on the screen anytime by pressing STILL button. Basic Operation 1 Press STILL button while watching STILL will be indicated on the lower left while • the picture is displayed. Remote: Screen: STILL NOTE: During STILL, the programs audio will continue.

  • Page 38: On Screen Messages

    Basic Operation On screen messages Some messages are displayed on the screen during channel changing or during programs. NO SIGNAL When STB cannot receive a channel signal, the whole screen becomes gray, then NO SIGNAL appears in the center. This may occur when: the signal is too weak •...

  • Page 39: Advanced Operation

    Electronic Program Guide (EPG) Electronic Program Guide (EPG) is an application for digital channels that lists current and scheduled programs that are or will be available on each channel and a short summary or commentary for each program. EPG is the electronic equivalent of a printed television program guide.

  • Page 40: Navigation Buttons

    Advanced Operation 2 Select the desired program using navigation buttons. s s / B B The cursor will move as you press any navigation • button. CURRENT TIME: 1 / 31 ( THU ) 3 : 03PM 3:00PM 4:00PM TODAY ( THU ) 22- 0 NTSC EPG not provided.
  • Page 41 Components of Electronic Program Guide (EPG) Day of broadcasting TODAY ( THU ) 22- 0 23- 0 Channel numbers and digital 26- 1 broadcasting station : 26- 2 * "NTSC" programs are from NTSC service. 26- 3 55- 1 Program viewing : Shows the program being broadcast on the channel you are choosing.

  • Page 42: Setup Menu For Preference

    Advanced Operation Setup menu for preference includes: • ADD / DELETE: You can add or delete channels in the channel map. • ANTENNA: You can verify and adjust the signal strength of each channel to get a clearer picture. • AUTOSCAN: You can get available channels automatically into the channel map by completing AUTOSCAN.

  • Page 43: Channel

    Adding channels ADD/ DELETE You can add channels in the channel map. ADD: You can add desired channels to the channel map. Once you add channels to a channel map, you will be allowed to select the channels in order using CH buttons.
  • Page 44 Advanced Operation 2 Select CHANNEL using buttons, then press ENTER. CHANNEL menu will appear. • CHANNEL QUIT ADD/DELETE ANTENNA CHANNEL AUTOSCAN DISPLAY CLOCK DETAIL 3 Select ADD/ DELETE using navigation buttons, then press ENTER. ADD/ DELETE menu will appear. • ADD/DELETE QUIT DELETE...
  • Page 45 5 Select ADD using navigation o o / p p buttons, then press ENTER. 26-1 will be added to the channel map. • ADD/DELETE QUIT DELETE CHANNEL DISPLAY CLOCK DETAIL NOTE: Digital channels can be added only with main channel numbers. When the digital channel added to a channel-map has sub-channels, however, the sub- channels can be selected using CH To continue adding:...

  • Page 46: Deleting Channels

    Advanced Operation Deleting channels ADD/ DELETE You can add and delete channels in the channel map. DELETE : You can delete channels from the channel-map. NOTE: When you delete digital and analog channels with the same main channel number, you will need to delete each channel.
  • Page 47 3 Select ADD/DELETE using navigation buttons, then press ENTER. ADD/ DELETE menu will appear. • ADD/DELETE QUIT DELETE CHANNEL DISPLAY CLOCK DETAIL 4 Select DELETE using o o / p p buttons, then press ENTER. The cursor will move to the channel map. •...
  • Page 48 Advanced Operation 5 Select the digital channel number 26 using navigation buttons. o o / p p 26-1 will be indicated in the box at the top of the • screen. ADD/DELETE QUIT DELETE CHANNEL DISPLAY CLOCK DETAIL TIP: When adding a channel number previously deleted, add the channel number by the steps in the ADD menu or renew the whole channel map with the AUTOSCAN menu.

  • Page 49: Adjusting Antenna

    Adjusting antenna ANTENNA You can verify the signal strength of each channel to get a clearer picture for both digital and analog broadcasts. Advanced Operation E.g., when adjusting the digital channel 26-1. 1 Select channel 26-1 to adjust using number button or CH o o / p p Channel 26-1 will be tuned in.
  • Page 50 Advanced Operation 2 Press SETUP to display SETUP menu. SETUP menu will appear. • SETUP QUIT CHANNEL DISPLAY CLOCK DETAIL 3 Select CHANNEL using buttons, then press ENTER. CHANNEL menu will appear. • CHANNEL QUIT ADD/DELETE ANTENNA CHANNEL AUTOSCAN DISPLAY CLOCK DETAIL 4 Select ANTENNA using...

  • Page 51: Receiving Channels

    Receiving channels AUTOSCAN STB has the convenient function to get available channels automatically. AUTOSCAN is capable of receiving available channels, both analog and digital, and storing those channels in a channel map. Channels once stored in a channel map can be selected using CH buttons.
  • Page 52 Advanced Operation 3 Select AUTOSCAN using navigation buttons, then press ENTER. AUTOSCAN menu will appear. • AUTOSCAN QUIT AutoScan will rescan all channels. This may take a while to complete. CHANNEL DISPLAY CLOCK PREVIOUS DETAIL 4 Select NEXT using o o / p p buttons, then press ENTER.
  • Page 53 To cancel AUTOSCAN during scanning: Press SETUP or ENTER to cancel. AUTOSCAN CANCELLED will appear on the • screen. AUTOSCAN CANCELLED CAUTION: If AUTOSCAN is cancelled during scanning, some channels not yet scanned may not be received. It is recommended to complete AUTOSCAN. 5 AUTOSCAN is complete.

  • Page 54: Selecting Screen Formats (Screen Ratio And Display Mode)

    Advanced Operation Selecting screen formats STB allows you to select a screen ratio and a display mode (aspect ratio) to match the formats of the program being broadcast and your TV screen. You can also change to aspect ratios you prefer to watch.
  • Page 55 3 Select SCREEN RATIO using navigation buttons, then press ENTER. Screen ratio options will appear. • DISPLAY QUIT SCREEN Select screen ratio. DISPLAY CHANNEL DISPLAY CLOCK DETAIL 4 Select the desired screen ratio using navigation buttons, then press ENTER. The screen ratio will be set. •...
  • Page 56 Advanced Operation DISPLAY MODE 2,3,4 2,3,4 1 Press SETUP to display SETUP menu. SETUP menu will appear. • Remote: Screen: SETUP QUIT CHANNEL DISPLAY CLOCK DETAIL 2 Select DISPLAY using o o / p p buttons, then press ENTER. DISPLAY menu will appear. •...
  • Page 57 3 Select DISPLAY MODE, using navigation buttons , then press ENTER. Display mode options will appear. • DISPLAY QUIT SCREEN Select display mode. DISPLAY CHANNEL LETTERBOX DISPLAY ZOOM CLOCK FULL DETAIL 4 Select the desired display mode using navigation buttons, then press o o / p p ENTER.
  • Page 58 Advanced Operation INFORMATION on Screen Ratio and Display Mode For standard 4:3 TVs displaying widescreen 16:9 broadcasts, your choices are: 4:3 TV screen 16:9 broadcast Letter Box Displays the entire picture image while fitting the picture to the screen by applying gray bars to the top and bottom of the screen.

  • Page 59: Setting The Clock

    Setting the clock To get the EPG (Electronic Program Guide) and Channel banner, you need to set the CLOCK correctly. NOTE: The clock function is featured for displaying EPG so there may be 5 minute-time lag a day at the maximum.
  • Page 60 Advanced Operation 3 Select Daylight Savings Time (DST) using navigation buttons, then o o / p p press ENTER. Daylight savings time setting menu will appear. • CLOCK QUIT CHANNEL Do you observe daylight saving time DISPLAY (DST)? CLOCK DETAIL 4 Select ON or OFF using navigation buttons, then press ENTER.
  • Page 61 INFORMATION on Time Zones ALASKA: ALASKA HAWAII: HAWAII PACIFIC: PACIFIC MOUNTAIN: MOUNTAIN CENTRAL: CENTRAL EASTERN: EASTERN ATLANTIC: ATLANTIC Advanced Operation 6 Select the desired time zone using navigation buttons, then press p p / s s / B B ENTER. The TIME ZONE will be set, then CLOCK menu •...
  • Page 62 Advanced Operation 7 Select MANUAL using buttons, then press ENTER. The current time setting menu will appear. • CLOCK Enter current time. QUIT YEAR 2002 CHANNEL DATE DISPLAY TIME CLOCK DETAIL 8 Enter YEAR, DATE, and TIME using navigation s s / B B buttons.
  • Page 63 9 Press ENTER when the cursor is on SET. Your settings will be activated. • Activated CLOCK 2002/ 3/31( SUN ) 1 52PM QUIT TIME ZONE CHANNEL MANUAL DISPLAY AUTO CLOCK DETAIL 10 Press SETUP to exit SETUP menu. CENTRAL Advanced Operation...
  • Page 64 Advanced Operation Adjusting the clock automatically STB is capable of adjusting the clock automatically using the channel clock data included in the signal from digital broadcast sources. In this menu, STB will search for channels with clock data, then select a channel to adjust the clock. STB will then adjust the clock using the channel selected.
  • Page 65 3 Select AUTO using o o / p p buttons, then press ENTER. Auto clock setting menu will appear, then STB • will start searching for channels with clock data. CLOCK Select a channel for auto clock setting. QUIT Searching. CHANNEL DISPLAY CLOCK...

  • Page 66: Setting A New Password

    Advanced Operation Setting a new password You will need to change the 4-digit password to protect your V-CHIP/CC setting. “0000” has been stored as the default password. NOTE: Once the power supply is stopped due to the power failure or the unplugging AC power cord for approx. 5 seconds, the password will go back to the default password “0000.”...
  • Page 67 3 Select V-CHIP/CC using button, then press ENTER. V-CHIP/CC password window will appear. • V-CHIP / CC QUIT Enter password. CHANNEL DISPLAY CLOCK DETAIL navigation 4 Enter the default password “0000.” o o / p p “ * ” will appear for each digit. •...
  • Page 68 Advanced Operation 5 Select NEW PASSWORD using navigation buttons, then press ENTER. Password setting menu will appear. • V-CHIP / CC QUIT Enter password. CHANNEL Confirm password. DISPLAY CLOCK DETAIL 6 Enter a new 4-digit password in the o o / p p upper space, then enter again in the lower space to confirm.

  • Page 69: Setting For V-Chip/Cc

    Setting for V-CHIP/CC V-CHIP/CC In V-CHIP/CC menu, you will make some important settings for the viewing programs you select. First of all, you will need to set your 4-digit password for your V-CHIP setting. Then you can proceed with making your settings. STB incorporates V-CHIP technology to block the viewing of movies and television programs according to their rating categories.
  • Page 70 Advanced Operation 1 Press SETUP to display SETUP menu. SETUP menu will appear. • Remote: Screen: SETUP QUIT CHANNEL DISPLAY CLOCK DETAIL 2 Select DETAIL using o o / p p buttons, then press ENTER. DETAIL menu will appear. • DETAIL QUIT V-CHIP / CC...
  • Page 71 4 Enter your 4-digit password. “ ” will appear for each digit. • V-CHIP / CC QUIT Enter password. CHANNEL DISPLAY CLOCK DETAIL After the correct password is entered, V-CHIP/CC menu will appear. V-CHIP / CC QUIT V-CHIP / CC CHANNEL MPAA RATING TV RATING...
  • Page 72 Advanced Operation 6 Select STB or TV using buttons, then press ENTER. V-CHIP / CC QUIT V-CHIP / CC CHANNEL MPAA RATING TV RATING DISPLAY CC SELECTION CLOCK NEW PASSWORD DETAIL 7 Press SETUP to exit SETUP menu. navigation s s / B B...

  • Page 73: Setting Mpaa Rating

    Setting MPAA rating MPAA RATING The MPAA (Motion Picture Association of America) uses the standard movie ratings. Age Label Description Not Rated by MPAA General Audience Parental Guidance Suggested. Some material may not be suitable for children. Parents Strongly Cautioned. PG-13 Some material may be inappropriate for children under 13.
  • Page 74 Advanced Operation 1 Press SETUP to display SETUP menu. SETUP menu will appear. • Remote: Screen: SETUP QUIT CHANNEL DISPLAY CLOCK DETAIL 2 Select DETAIL using o o / p p buttons, then press ENTER. DETAIL menu will appear. • DETAIL QUIT V-CHIP / CC...
  • Page 75 4 Enter your 4-digit password. “ ” will appear for each digit. • V-CHIP / CC QUIT Enter password. CHANNEL DISPLAY CLOCK DETAIL After entering the correct password, V-CHIP/CC menu will appear. V-CHIP / CC QUIT V-CHIP / CC CHANNEL MPAA RATING TV RATING DISPLAY...
  • Page 76 Advanced Operation 6 Select PG-13 using o o / p p buttons, then press ENTER. E.g., when you want to block all PG-13 movies: Lock indicators will be added to programs rated • PG-13 and above. V-CHIP / CC Set MPAA rating QUIT NC-17 CHANNEL...

  • Page 77: Setting Tv Rating

    Setting TV rating TV RATING (TV Parental Guidelines) TV rating allows parents to block out programs they don’t want their children to see. TV rating consists of the age labels and the content labels. The following are the descriptions for each label: Age Label Description Mature Audience Only :...
  • Page 78 Advanced Operation 1 Press SETUP to display SETUP menu. SETUP menu will appear. • Remote: Screen: SETUP QUIT CHANNEL DISPLAY CLOCK DETAIL 2 Select DETAIL using o o / p p buttons, then press ENTER. DETAIL menu will appear. • DETAIL QUIT V-CHIP / CC...
  • Page 79 4 Enter your 4-digit password. “ * ” will appear for each digit. • V-CHIP / CC QUIT Enter password. CHANNEL DISPLAY CLOCK DETAIL After the correct password is entered, V-CHIP/CC menu will appear. V-CHIP / CC QUIT V-CHIP / CC CHANNEL MPAA RATING TV RATING...
  • Page 80 Advanced Operation To set age-based ratings: E.g., when you want to block all TV-14 programs 1. Select TV-14 using o p navigation buttons, then press ENTER. Lock indicators will be added to all TV-14 and • higher categories. V-CHIP / CC Set TV rating QUIT TV-MA...

  • Page 81: Selecting Cc Options

    Selecting CC options CC SELECTION Closed Caption (CC) provides you with on-screen text versions of the audio content for the program being broadcast. In this menu, you are allowed to turn Closed Caption signal On or Off, to set a language for the closed caption and to choose a format for the closed caption.
  • Page 82 Advanced Operation 3 Select V-CHIP/CC using buttons, then press ENTER. V-CHIP/CC password window will appear. • V-CHIP / CC QUIT Enter password. CHANNEL DISPLAY CLOCK DETAIL navigation 4 Enter your 4-digit password. o o / p p “ * ” will appear for each digit. •...
  • Page 83 5 Select CC SELECTION using navigation buttons, then press ENTER. CC options menu will appear. • V-CHIP / CC QUIT V-CHIP / CC CHANNEL MPAA RATING TV RATING DISPLAY CC SELECTION CLOCK NEW PASSWORD DETAIL 6 Select the desired CC option using navigation buttons, then press ENTER.

  • Page 84: Choosing The Screen Language

    Advanced Operation Choosing the screen language MENU LANGUAGE English, French, and Spanish are available for the screen menu. You can choose the language you prefer. NOTE: ENGLISH has been selected as the default before purchase. 2,3,4 2,3,4 1 Press SETUP to display SETUP menu. SETUP menu will appear.
  • Page 85 3 Select MENU LANGUAGE using navigation buttons, then press ENTER. Language menu will appear. • DETAIL QUIT V-CHIP / CC Select menu language. CHANNEL MENU LANGUAGE DISPLAY CLOCK DETAIL 4 Select the desired language using o o / p p navigation buttons (E.g., select French), then press ENTER.

  • Page 86: Appendix

    Appendix Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Symptom No power The STB is not responding to the remote...
  • Page 87 Symptom • Make sure that the audio cable is correctly connected. • Make sure that audio devices (stereo, TV, decoder) are turned on. • Make sure that audio devices (stereo, decoder) are correctly set to STB audio • Check the audio cable. Either a standard audio cable or a coaxial digital No sound •...

  • Page 88: Specifications

    Appendix Specifications Product STB for ATSC/NTSC Connecting Jacks ANT IN F connector (75 ohm) Video Output (component) 3-pin jack (Y, Pb, Pr) S-Video Output Mini DIN 4-pin jack (75 ohm) Video Output 1-pin jack, 1Vpp Analog Audio Output 2-pin jack (L, R) 450 mVrms (100k ohm) Digital Audio Output 1-pin jack (Dolby Digital)
  • Page 89 Digital audio (coaxial) output jack: Digital audio (coaxial) output jack send digital audio data to audio devices equipped with a digital audio (coaxial) input jack. Dolby® Digital: Dolby® Digital (when available) provides 6 independent soundtrack channels through the coaxial output jack. STB has a Dolby Digital output (labeled DIGITAL AUDIO (COAXIAL)) that can be connected to an external Digital Audio receiver/ decoder equipped...

  • Page 90: Guía Para Rápida Consulta (Español)

    Guía para rápida consulta Ubicación de los controles PANEL FRONTAL 1 Botón POWER: Para encender y apagar el STB. 2 Indicador POWER: Se ilumina cuando el STB está encendido. NOTA: Cuando se enciende el STB, el indicador POWER primero parpadea y luego se ilumina de manera constante.

  • Page 91: Instalación De Las Pilas

    CONTROL REMOTO 1 Botón POWER: Para encender y apagar el STB. 2 Botones numéricos: Use estos botones para introducir números de canal y contraseñas, así como para ajustar la hora. 3 Botón ENTER: En el menú SETUP, presione este botón para registrar la opción seleccionada.

  • Page 92: Conexiones De Antena

    Guía para rápida consulta Use un cable de antena estándar para conectar la toma mural a la toma ANT IN del STB. Conexión del STB a la antena A la antena AL CONECTAR EL EQUIPO A UNA CAJA PARA CABLE: Señales de televisión por cable entrantes A la antena...

  • Page 93: Conexión Del Stb A Un Sdtv Utilizando La Salida Video

    Conexión del STB a un SDTV utilizando la salida VIDEO 1 Use un cable de antena estándar para conectar la toma mural a la toma ANT IN del STB. 2 Use un cable de audio estándar para conectar las tomas de salida de audio (L, R) del STB a las tomas de entrada de audio (L, R) del televisor.

  • Page 94: Configuración Inicial

    Guía para rápida consulta Configuración inicial ASISTENTE PARA LA CONFIGURACIÓN (SETUP WIZARD) El SETUP WIZARD es un práctico menú que le ayuda hacer los ajustes iniciales del STB. Cuando se enciende el STB por primera vez después de conectar el cable de alimentación de CA, el SETUP WIZARD aparece automáticamente en la pantalla.
  • Page 95 8 Introduzca el año (YEAR), fecha (DATE) y hora (TIME) utilizando los botones de navegación o los botones o o / p p / s s / B B numéricos. • Cada vez que introduzca un número, presione ENTER para mover el cursor. •...

  • Page 96: Warranty

    FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase.

Table of Contents