Download  Print this page

Panasonic ET-RFE300 Operating Instructions Page 3

Replacement filter unit.
Hide thumbs
   

Advertisement

Replacing the air filter unit (continued)
3) Remove the air filter unit.
Pull out the air filter unit from the tabs of the projector while slightly pressing the knob at
z
the center of the frame at the connecting terminal side (rear side) inward as shown by the
arrow, and remove the air filter unit. (Fig. 2)
After pulling out the air filter unit, remove foreign objects and dust from the air filter unit
z
compartment and the projector's air intake port if there are any. (Fig. 3)
4) Attach the unused air filter unit (Replacement Filter Unit) to the projector.
Perform Step 3) in the reverse order.
z
Push in the air filter unit securely until it clicks into place.
z
5) Attach the air filter cover.
Perform Step 2) in the reverse order to close the air filter cover, and push in the air filter
z
cover securely until it clicks into place.
Use a Phillips screwdriver to firmly tighten the air filter cover fixing screw (x1).
z
For cabinet type B
Air filter cover
Fig.1
1) Turn off the power of the projector and set the <MAIN POWER> switch to
<OFF> and disconnect the power plug from the power outlet.
When the power is turned off, be absolutely sure to follow the procedure described in
z
"Switching off the projector" in the operating instructions of the projector.
2) Remove the air filter cover. (Fig. 1)
Pull out the air filter cover from the hook of the projector while slightly pushing upward the
z
tabs of the air filter cover and open it in the direction of the arrow in figure.
When pulling open the air filter cover, be sure to firmly hold the air filter cover with your
z
hand. Opening the air filter cover quickly may result in the cover falling.
Please remove if there is dirt and dust in the air filter cover.
z
3) Remove the air filter unit. (Fig. 2)
Pull out the air filter unit from the tabs of the projector while slightly pressing the knob at
z
the center of the frame at the connecting terminal side (rear side) inward as shown by the
arrow, and remove the air filter unit.
After pulling out the air filter unit, remove foreign objects and dust from the air filter unit
z
compartment and the projector's air intake port if there are any.
4) Attach the unused air filter unit (Replacement Filter Unit) to the projector.
Perform Step 3) in the reverse order.
z
Push in the air filter unit securely until it clicks into place.
z
5) Attach the air filter cover.
Air filter unit compartment and
the projector's air intake port
Knob
Tabs
Air filter unit
Fig.2
ENGLISH - 3

Advertisement

Table of Contents

   Related Manuals for Panasonic ET-RFE300

Comments to this Manuals

Symbols: 0
Latest comments: