Warnings and Precautions TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. This symbol, located on back or bottom of the unit, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Important Safety Instructions 1. Read Instructions - All the safety and operating instruction should be read before the product is operated. 2. Retain Instructions - The safety and operating instruction should be retained for future reference. 3. Heed Warnings - All warning on the product and in the operating instructions should be adhered to.
In the Box • SIP3045 • Remote Control • Instruction Manual iPod Adaptor x 5pcs • AC Adaptor • Features • Certified iPod Connector installed for iPod docking • Recharge Battery for iPod/mini/nano/ photo/video/touch/iPhone Powering the Unit Power the unit by connecting it to a standard AC outlet (120V ~ 60Hz) via the at- tached AC cord.
Powering The Unit The unit requires 4 x 1.5V AA batteries, not included CLK SET Changing the Remote Battery WARNING: Danger of explosion if the remote control’s battery is incorrectly installed. Replace only with the same or equivalent battery. 1. Push the Release Button and pull out the Battery Compartment to access the battery.
Locations of Controls Control Definitions Power Button Press the Power Button to turn the unit off and on. Snooze Button Press the Snooze Button to delay alarm for six minutes. DC Jack DC Jack for 5V adaptor LINE IN Jack Use the Auxiliary Input to connect an external audio source to the unit.
Page 7
iPod Dock iPod Connector to dock iPhone/iPod Volume Up/Down Button Turn the Volume Button to adjust the volume of audio output from the unit. Also select up/down for alarm time and time setting LCD Display Use the LCD Display to view the time and current function of the unit. Clk Set Button Press and hold the Clk Set Button, with the unit powered off, to set the time.
Playing an iPod 1. Dock an iPod to the unit by following the “Docking an iPod” directions. 2. Turn the unit on by pressing the Power Button. 3. Press the Play/Pause Button on iPhone/iPod to play. 4. Press the Skip/Search Buttons on iPhone/iPod to skip through tracks or search through individual tracks.
TROUBLE SHOOTING GUIDE Symptom iPod Player Unit does not respond (no power) iPod does not dock properly iPod does not respond to the unit iPod did not charge up General Specification: Power Source: DC Battery 4 x 1.5V AA size Power Source of Remote Control: Power Consumption: 14 Watt Audio Output Power: 2 Watt/Channel...
LIMITED PRODUCT WARRANTY This quality product is warranted to be free from manufacturer’s defects in material and workman-ship, provided that the unit is used under the normal operating conditions intended by the manufacturer. Should you have any problem with this product, please and it is highly recommended to visit our website at www.curtisint.com before you take any other steps as we have additional copies of instruction manuals, operating manuals and trouble shooting tips on our website which gives you the answer on most of the questions you could have in operating the unit.