Use the induction cooking
zones with suitable
• correct: cast iron, steel, enamelled
steel, stainless steel, multi-layer
bottom (with a correct marking from a
• not correct: aluminium, copper,
brass, glass, ceramic, porcelain.
Cookware is suitable for an induction
• water boils very quickly on a zone set
to the highest heat setting.
• a magnet pulls on to the bottom of
The bottom of the cookware
must be as thick and flat as
Ensure pan bases are clean
and dry before placing on
the hob surface.
Induction cooking zones adapt to the
dimension of the bottom of the
The cooking zone efficiency is related to
the diameter of the cookware. The
cookware with a diameter smaller than
the minimum receives only a part of the
power generated by the cooking zone.
Refer to "Technical data".
5.2 The noises during
If you can hear:
Keep cooked food warm.
1 - 2
Hollandaise sauce, melt: but-
ter, chocolate, gelatine.
• crack noise: cookware is made of
different materials (sandwich
• whistle sound: you use the cooking
zone with high power level and the
cookware is made of different
materials (sandwich construction).
• humming: you use high power level.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer
to hob malfunction.
5.3 Öko Timer (Eco Timer)
To save energy, the heater of the
cooking zone deactivates before the
count down timer sounds. The difference
in the operation time depends on the
heat setting level and the length of the
5.4 Examples of cooking
The correlation between the heat setting
of a zone and its consumption of power
is not linear. When you increase the heat
setting, it is not proportional to the
increase of the consumption of power. It
means that a cooking zone with the
medium heat setting uses less than a half
of its power.
The data in the table is for
Put a lid on the cookware.
5 - 25
Mix from time to time.