To Assemble - Black & Decker HandyChopper HC20 Use And Care Book Manual

Figure A
toc
Locking
Tabs
2. Grasp the Bowl firmly and place it on the
Base. Line up the Locking Tabs on the Bowl
and the Base and turn clockwise until the
Bowl locks into place. (Figure A)
3. Slide the Knife Blade down over the
shaft. Be careful not to touch the Blade as it
is extremely sharp.
4. Place the Lid on the Bowl, with the
Extended Tab on the same side as the Base
Slot. Turn the Lid clockwise into the Base
Slot as far as it will go.
2. Wipe off the
Base/ Motor Housing
with a damp cloth; do
not immerse Base in
water.

TO ASSEMBLE

1. Place the Base
Unit on a counter, or
other flat work sur-
face. The rubber feet
will prevent the unit
from slipping during
operation.
6