The blender does not
The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g.
>PE<, >PS<, etc. Please dispose the packaging materials in the appropriate container at the community waste disposal facilities.
on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall
be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product
is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or the shop where you purchased the product.
The carafe (A)/base (F) are not fixed properly.
button is not pressed.
The motor has overheated. The display (L) is
The plug is not properly connected to the mains
Check if all the components are in correct
position. Note! the carafe (A) can only be placed
on the base (F) with handle towards the user
Make sure the
button is illuminated. If not,
button to switch the blender on.
Allow the appliance to cool down for at least 5
minutes and all the buttons will lit up again.
Check the connection of the plug to the outlet or
try another outlet.
Wait until power outage is over.
Contact authorized service.