Advertisement
Advertisement
Table of Contents
Related Manuals for Aquatec Equipment AQUAPRO Series
Summary of Contents for Aquatec Equipment AQUAPRO Series
- Page 1 12 LED POND/GARDEN LIGHT INSTRUCTION MANUAL...
- Page 2 Thank you for purchasing a quality AQUAPRO product, the answers for your watergarden made easy! 12 LED WHITE VOLTAGE (V) POWER (W) *2.5 CABLE LENGTH (m) *Light only. NB: AC Adaptors are subject to induced power lose INSTALLATION DESCRIPTION AND FEATURES Your AQUAPRO 12 LED White Pond/Garden • If required, have a qualified electrician Light has been manufactured with advanced install a weather proof power point near technology and quality materials to ideally to the pond or garden, within reach of integrate into any pond and garden scene, AC Adaptor and light. thanks to their compact design. • Mount the AC Adaptor in a dry and • The AQUAPRO light has a glass lens and protected location making sure that it is suitable for use in or out of water, also can’t be wet by either rain or reticulation.
- Page 3 12 LED POND/GARDEN LIGHT INSTRUCTION MANUAL • Insert the Bi-pin male plug on the end IMPORTANT SAFEGUARDS of the light cable into the transformer To guard against injury, basic safety precautions and tighten the locking collar firmly. The should be observed including but not limited to transformer can now be turned on. the following; • The light should only be used in clean water. • Once in the correct position lock the Do not use the light in any solvent or flammable light by tighten the thumb screws, liquids. Do not use in chlorinated or salt water. taking care not to over tighten. • Do not operate the light if the light or any of the components of the light such as the power MAINTENANCE cable or AC Adaptor have been damaged. There is minimal maintenance required • If the 240V plug supplying the AC Adaptor on the AQUAPRO LED pond lights. The gets wet, do not unplug the cord. Disconnect light should be inspected on a regular the circuit breaker that supplies power to the basis to ensure the light or cable is not power outlet. Then unplug and examine the damaged in any way. Clean the lens on the plug and power outlet for presence of water. If light regularly for maximum efficiency.
- Page 4 www.aquatecequipment.com • Always unplug the light from the power supply - repair the product, if possible; or when not in use or before performing any - provide a replacement product; or maintenance. Never pull the AC Adaptor cord - if a replacement product is not available, to disconnect the plug from the power supply. provide a refund for the purchase price paid. Grasp the plug and pull to disconnect. • You will bear the cost associated with claiming • Do not install or store the light where it will be under the Warranty such as the cost of exposed to extreme hot or cold temperatures. transportation and delivery of the product to and from the place of purchase. • Keep out of reach of children or pets. This appliance should not be used by children or • The product contains a complete lens set and lens seal. These items are exhaustible infirm persons without supervision. (Exhaustible Items) and are not covered under • Do not cut the cord as this will result in voiding the Warranty. your warranty. • The Warranty will be void if any of the following • Care should be taken to arrange the power events occur, as determined by us, at our sole cord so that it cannot be accidently tripped discretion (Voiding Events): over or pulled.
Need help?
Do you have a question about the AQUAPRO Series and is the answer not in the manual?
Questions and answers