SVAT UC1301 Instruction Manual

SVAT UC1301 Instruction Manual

Wireless indoor color hidden teddy cam

Advertisement

Quick Links

Wireless Indoor Color
Hidden Teddy Cam
UC1301
Instruction
Manual
www.svat.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UC1301 and is the answer not in the manual?

Questions and answers

Summary of Contents for SVAT UC1301

  • Page 1 Wireless Indoor Color Hidden Teddy Cam UC1301 Instruction Manual www.svat.com...
  • Page 2: Important Safety Precautions

    IMPORTANT SAFETY PRECAUTIONS PLEASE READ BEFORE USE Congratulations on your new purchase of SVAT’s UC1301 Teddy Cam. Please read through carefully before installing or using this system. • All the safety and operating instructions should be followed and read before the product is operated.
  • Page 3: Main Features

    INTRODUCTION The SVAT UC1301 Wireless Indoor Color Hidden Teddy Cam allows you to discretely keep an eye on your children. The Teddy Cam is very easy to install, the transmitter is discretely hidden, and you don’t have to worry about messy wiring through your infant’s room. This smart and cuddly bear is the perfect solution for affordable baby monitoring.
  • Page 4: Installation

    INSTALLATION TEDDY CAM 1. The Teddy Cam can be powered by either a 9 volt battery or with the included AC Adapter. 2. Move the Teddy Cam to the desired location. NOTE: The transmission range of the Teddy Cam is up to 150ft. Real distance depends on its operating environment.
  • Page 5 INSTALLATION Cont’d... RECEIVER 1. Insert the AV Adapter Plug into the AV Output port of the receiver 2. Insert the yellow and white cable plugs into the Video Input and Audio Input Jacks of your TV. Bear Video Camera 3. Connect the AC Power Adapter to the 9V Power Input Jack of the receiver.
  • Page 6: Troubleshooting

    TROUBLESHOOTING Please read this user’s manual carefully before using. If you still have diffi- culties to use the product, consult the following syndrome, which will help you solve most common problems. No picture after turning on the TV 1. Check the power supply. •Ensure that both the transmitter and receiver are properly connected and set to the same channels.
  • Page 7: Specifications

    SPECIFICATIONS Wireless Camera -- CMOS MODEL Scanning System Image Sensor Efficiency Pixels Horizontal Scan Frequency Vertical Scan Frequency Synchronize Resolution Min. Illumination S/N Ratio Video Input Auto Electronic Exposure Auto White Balance Supply Voltage Power Consumption Operation Environment Lens Weight RECEIVER MODEL Frequency...
  • Page 8: Product Warranty

    If you have warranty or support issues please contact us using any of the following methods: SVAT Electronics USA 2315 Whirlpool St., Unit 333 NIagara Falls, New York...
  • Page 9 If you require more information on this product or other SVAT products visit www.svat.com __________________________________________________________________________________________________________________ FCC STATEMENT: This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules.

Table of Contents