IBM Hardware Management Console Installing And Configuring page 42

Power systems
Table of Contents

Advertisement

Figure 4. Installing the right slide rail into the back of the rack
2. Push on the end of the rail (A) to compress the rail's spring-loaded mechanism, and insert the rail
into the mounting flange (B) locations, on the right side of the rack. The rail will decompress and the
two rail pins will protrude through the bottom and middle holes (B) on the EIA unit.
Figure 5. Installing the right slide rail into the front of the rack
3. Repeat steps 1 on page 27-2 to install the left slide rail, which is marked left, into the rack.
28
Power Systems: Installing and configuring the Hardware Management Console

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents