Canon IP100 User Manual page 87

SMC (http://www.smc.com)
SMC2404WBR – Barricada Turbo 11/22 Mbps Wireless Cable/DSL Broadband
Router
SMC7004VBR – Barricada Cable/DSL Broadband Router
SMC7004CWBR – Barricada Wireless Cable/DSL Broadband Router
1. Log into your router using your router IP.
2. After you are logged in, click NAT on the left side of the page.
3. Click on Virtual Server on the left side of the page.
4. Enter the following information on the page:
Line #1:
Private IP:
Private Port:
Type:
Public Port:
Line #2
Private IP:
Private Port:
Type:
Public Port:
5. Click Apply to save the settings. WebCAM should now be configured to work with
your router and be accessible from the Internet.
SMC7004AWBR – Barricade 4-port 11Mbps Wireless Broadband Router
1. Log into your router using your router IP.
2. Click on Virtual Server on the left side of the page.
3. Enter the following information on the page:
For ID #1:
Service Port:
Private IP:
Enable:
WebCAM user manual
Type in the camera's IP address, for example:
192.168.0.5 (Look at WebCAM's IP Address LCD
display for the last 3 digits of the camera's IP address)
80
TCP
80
Type in the camera's IP address, for example:
192.168.0.5 (Look at WebCAM's IP Address LCD
display for the last 3 digits of the camera's IP address)
9001
UDP
9001
80
Type in the camera's IP address, for example:
192.168.0.5 (Look at WebCAM's IP Address LCD
display for the last 3 digits of the camera's IP address)
Checked in
Appendix A: Router Configuration
-84-