Canon IP100 User Manual page 85

Siemens (http://www.speedstream.com)
SpeedStream 2602 – 2-Port DSL/Cable Router
SpeedStream 2623 – Wireless DSL/Cable Router
SpeedStream 2624 – Wireless DSL/Cable Router
1. Log into your router using your router IP.
2. After you are logged in, click on Advanced Setup -> Virtual Servers.
3. Enter the following information on the page:
Line #1:
Private IP:
Private Port:
Type:
Public Port:
Line #2
Private IP:
Private Port:
Type:
Public Port:
4. Click Enter to save the settings. WebCAM should now be configured to work with
your router and be accessible from the internet.
SpeedStream 2604 – 4-port DSL/Cable Router
1. Log into your router using your router IP.
2. After you are logged in, click on Advanced Setup -> Virtual Servers.
3. Under the Properties section, there are a few entries you'll need to add. Check in
the checkbox for Enable.
4. Under the first box, next to the Enable checkbox, type in: WebCAM Web.
5. Under PC (Server), select your camera or the camera's IP address from the list. If
the camera is not listed, select the link titled "My PC is not listed."
6. Leave Protocol as TCP.
WebCAM user manual
Type in the camera's IP address, for example:
192.168.0.5 (Look at WebCAM's IP Address LCD
display for the last 3 digits of the camera's IP address)
80
TCP
80
Type in the camera's IP address, for example:
192.168.0.5 (Look at WebCAM's IP Address LCD
display for the last 3 digits of the camera's IP address)
9001
UDP
9001
Appendix A: Router Configuration
-82-