Chapter 5: Webcam Web Manager; Section 1. Introduction - Canon IP100 User Manual

Chapter 5: WebCAM Web Manager

Section 1. Introduction

After you have setup the hardware and set an IP address for WebCAM, you will then
be able to go to WebCAM web site to monitor and control the PC cameras. All you
have to do is enter the new IP address into any web browser.
1. Start the Web Brower (Netscape or Internet Explore)
2. Enter the WebCAM IP Address that was set earlier using "Setup Wizard" (e.g.
192.168.0.30, if you do not remember, goto to WebCAM and look at the LCD
display) and press ENTER
3. A login screen will appear.
WebCAM (either via webpage or manual button), you will need to provide the
default User Login Name "admin" [in small caps] and Login Password (Master
password as shown on the freeware CD).
WebCAM user manual
Fig.12. Enter WebCAM IP address
For first time users and users resetting their
Click "Apply" to enter.
Fig.13. WebCAM Login screen
Chapter 5: Web Manager
-21-