OPERATING THE ESPRESSO MACHINE
When the Espresso Machine is turned
on, the LED will flash as it warms up.
When the machine is ready, the LED
will glow continuously.
Place your cup on the cup holder.
NOTE: To avoid damage and injury due to hot vapor when brewing, open the capsule
door ONLY by the handle 3 seconds after the brewing cycle has completed. Never try
to pull up the capsule door with your fingers.
NOTE: You can change your desired
volume selection while the Espresso
Machine is heating up. When you do
this, the LED bar will no longer flash,
but remains lit over the selected
portion size and the brew button
continues to flash while the Espresso
Machine heats up. Press the brew button.
Once the correct temperature is reached,
the brew cycle will start on its own.
Lift the handle to raise the lid on the
capsule loading compartment to its
fully upright position.