Technical Data; Operating Instructions; Your New Appliance; Position - Bosch TR2000TF Series Installation And Operating Instructions Manual

3

Technical data

Design
Capacity
Rated pressure
Weight empty
Class of protection accord. to
Degree of protection accord. to
Mark of conformity
Cold-water connection
Hot-water connection
Circulation connection
Flow rate max.
Rated voltage
Tank material
Energy efficiency class
Hot water heating energy efficiency
Load profile
Annual energy consumption
Daily energy consumption
Sound power level
Mixed water quantities V40 according to
the European Guideline 814/2013
Mixed water quantities at 40 °C (15 °C/65
°C) according to EN60379
4

Operating instructions

Please read and observe the detailed safety instructions at the start
of these instructions!
• Important: The appliance may never be exposed to frost!
CAUTION:
Risk of electric shock!
▶ Switch off the mains voltage supply immediately if a fault occurs.
• Immediately shut off the cold water supply to the appliance should it
leak.
4.1

Your new appliance

This floor-standing water heater enables you to heat up as much drinking
water as required to approximately 60 °C and store it for household use.
On request a qualified professional will increase the maximum
adjustable temperature to approx. 80 °C.
Several tap connections can be supplied with hot-water. The mixers can
always supply cold-water.
Our products are environment-friendly, can be recycled and conserve
energy.
How to operate the floor-standing water heater (Fig. 8)
• Adjustments are facilitated by the control panel on the appliance. The
control panel indicates the various settings, temperatures, volumes
of water and how many baths or showers may be taken.
• Preselect the required temperature with temperature selector
switch 1.
4.2

Position

•
Cold and anti-freezing protection
TR2000TF – 6 720 875 992 (2017/07)
TR2000TF 200 T
[l]
[MPa (bar)]
[kg]
VDE
VDE
[l/min]
[V~]
[%]
[kWh]
[kWh]
[dB]
[l]
[l]
I
E
III
• During the heating process, expansion water drips out of the safety
• Rotate the temperature selector switch 1 to position "•" to switch off
4.3
This is the most cost-effective mode of operation.
Set the required water temperature with the temperature selector
switch 1.
• The power supply company activates off-peak power by means of
You will then have hot-water during the day.
4.4
If the volume of hot-water provided during the night is insufficient, water
can also be heated during the peak period:
• Press push-button 2.
The water is heated to the temperature set on the temperature selector
switch 1. When the selected temperature has been reached, the peak-
rate heating automatically switches off.
TR2000TF 300 T
sealed (pressurised)
200 300
0.6 (6) 0.6 (6)
53 68
I
IP 24D
DIN
AGI
G 1 A
G 1 A
G 1/2 A
30 38
230/400 230/400
steel. interior specially enamelled
C C
38.7 38.8
XL XL
4 332 4 316
19.920 19.828
15 15
317 490
397 590
The water is heated to approx. 38 °C.
Energy conservation position. The water is heated to approx.
60 °C.
The selector switch will click into place at position "E".
Setting for hot-water and when large amounts of hotwater are
required. The water is heated to approx. 80 °C. (this setting only by
qualified professional)
valve.
the heating.
Operation during the off-peak period
(off‑peak power)
a signal in the power system. Primary heating then switches on
automatically.

Additional operation during the peak period

Technical data
TR2000TF 400 T
400
0.6 (6)
85
45
230/400
C
38.4
XL
4357
20.700
15
617
780
11