Download  Print this page

Sunix 8062-GM Quick Installation Manual

Industrial management ethernet switches
Hide thumbs
   

Advertisement

771-ESWQIG0000-NCI
Industrial Management Ethernet Switches
Introduction
SUNIX Ethernet infrastructure products. SUNIX Ethernet Switches(ESW
Series) are designed focus on Ethernet deployment in automation applications
and specially developed for industrial Ethernet applications with all concerns
for industrial environments taken into consideration. The advanced
management features, Elite-Ring (communication redundancy technology),
easy configuration and robust mechanical from factors enable quick Ethernet
installation for factory, transportation , building and utility automation
applications. Redundant power inputs and relay output alarm provides the
possibility to build an on-site alarm system. SUNIX switches are ideal for any
application where performance demands are highest, environments are harsh
and operations are nonstop.
Features
Fast redundant ethernet ring with recovery time < 10ms (Elite Ring)
Support SNMPv1/v2c/v3 & RMON network management
Support Web-based, Telnet, Console, Utility configuration
Supports IGMPv1/v2/v3 snooping, Quality of Service determined by port
Supports port base/802.1Q VLAN and Dynamic VLAN Register Protocol (GVRP)
Event notification by Email, SNMP trap and Relay Output
Supports online port mirroring and IP security
Multi Ring and Dual Homing support
Port rate limiting and broadcast storm limiting
Redundant dual low-voltage DC inputs (12 ~ 48VDC)
Supports 802.3ad, LACP for optimum bandwidth utilization
Port Trunking for optimum bandwidth utilization
Long-haul transmission distance up to 30km (Fiber port)
Support all LAN switches setting at the same time by the SUNIX commander
Din-rail/Wall-mounting installation
Package List
Please check if the following items are present and in good condition upon opening
your package. Contact your vendor if any item is damaged or missing.
Management Industrial Ethernet Switch
Accessories
SUNIX Din Rail Accessory Package
×
1
Wall Mountable Accessory Package
×
1
Fiber Lid
×
2 ( For ESW-80XX-G Series Model )
SUNIX CD
Quick Installation Guide (This Document )
User Manual ( In CD )
Model Specification
8082-GT 8 Ports 10/100Base-TX + 2 Ports 10/100/1000Base-TX
8082-GP 8 Ports 10/100Base-TX + 2 Ports 1000Base-FX (SFP Type)
8062-GM 6 Ports 10/100Base-TX + 2 Ports 1000Base-SX Multi Mode
8062-GS 6 Ports 10/100Base-TX + 2 Ports 1000Base-LX Single Mode
8062-GT 6 Ports 10/100Base-TX + 2 Ports 10/100/1000Base-TX
8062-TX 8 Ports 10/100Base-TX
8062-MM 6 Ports 10/100Base-TX + 2 Ports 100Base-FX (Multi Mode)
8062-SS 6 Ports 10/100Base-TX + 2 Ports 100Base-FX (Single Mode)
DIN-Rail Installation Step
(
)
(
)
Quick Installation Guide
Wall-Mounting Installation Step
Elite-Ring Technology
Redundancy is always a primary
consideration for developing secure
and reliable industrial networks.
SUNIX Managed Switches are
equipped with Elite-Ring feature
which provides industrial Networks
with high-speed communication
redundancy.
A network can recover in less
than 10ms.
Elite-Ring employs a ring structure
of either copper or fiber optic cable
or combination of both by using two
ports of each switch in a ring network.
SUNIX Comander Management Utility Software
SUNIX Commander is a powerful Switch managed software designed by
SUNIX Group. It could provide users set up all Switches in the ethernet by
one time. Users could set up one group Switches IP Address, every kind of
IEEE 802 Protocol, upgra e at the same time. SUNIX
managing software lowers users' burden and saves time.
Version 1.0
d
Commander a strong

Advertisement

Table of Contents
loading

  Related Manuals for Sunix 8062-GM

No related manuals

  Summary of Contents for Sunix 8062-GM

  • Page 1 SUNIX Comander Management Utility Software SUNIX Commander is a powerful Switch managed software designed by SUNIX Group. It could provide users set up all Switches in the ethernet by one time. Users could set up one group Switches IP Address, every kind of IEEE 802 Protocol, upgra e at the same time.
  • Page 2 No.10 Fiber Port No.7 LAN Port No.5 LAN Port No.3 LAN Port ACT/LINK LED (Green) No.1 LAN Port Full Speed LED (Orange) Copyright© by SUNIX Co, LTD. All rights reserved. TEL: +886-2-8913-1987 Website: www.sunix-ncci.com.tw FAX: +886-2-8913-1986 E-mail: info@sunix-ncci.com.tw Version 1.0...

This manual is also suitable for:

8062-gs8062-gt8062-mm8062-ss8062-tx8082-gp ... Show all