SAFETY PRECAUTIONS This vacuum cleaner should only be used for normal dry household dust and dirt. • The manufacturer cannot be held responsible for any damage caused by use of operation of the • cleaner contrary to these instructions. If the cleaner is wrongly operated for a purpose other than that for which it is intended, no liability •...
DESCRIPTION AND OPERATION HOSE CONNECTION Connecting the hose: insert hose fi rmly into the hose inlet. You will hear it click into place. Disconnecting the hose: press the button and pull the hose out of the vacuum cleaner. SUCTION CONTROL The suction control at the hand grip enables you to control suction power.
Page 5
DESCRIPTION AND OPERATION ON/OFF SWITCH Press the ON/OFF switch to power on or off. CORD REWIND BUTTON Press the cord rewind button to rewind the power cord. DUST METER Change the dust bag when the dust meter displays RED. ACCESSORY NOZZLE Attach crevice nozzle to the end of the hose for detail cleaning.
Page 6
DESCRIPTION AND OPERATION STORAGE Hook the vacuum head to the body using the built-in clip to store the cleaner. PRACTICAL PARKING Hook the vacuum head to the body using the built-in clip when you temporarily stop vacuuming.
CLEANING THE FILTER Turn off the cleaner. Open the cover. Shake dust out of fi lter and replace. Close the cover. Pull out the exhaust fi lter. Pull out motor protection fi lter. Open the exhaust grill. Shake the dust out of the fi lter and replace.
CHANGING THE DUST BAG Note: If no dust bag has been placed into the dust bag holder, the cover can not be closed. BEFORE ASKING FOR SERVICE Before asking for service, please check each item below if you have trouble with your cleaner. PROBLEM Suction power is weak.
Need help?
Do you have a question about the SNV12CBRB and is the answer not in the manual?
Questions and answers