Press the Setup key.
Step 2. Move the highlight to "Date, Time".
Step 3. Highlight, then select the appropriate setting for the Year,
Month, Day, Hour (in 24 hour format, only) and Minute as
Step 4. Highlight and select Store Date, Time to change the date
The default sets that are set in the factory for the monitor are described
in "Selecting a QuickSet" on page 102.
If you change the QuickSet, any currently active automatic NBP
measurement will be stopped.
Step 1. To get into the QuickSets menu, press the QuickSets
SmartKey (you may have to press
SmartKey, if it is configured).
a. Highlight the area at the top left of the screen (where the
current QuickSet is displayed) by touching the TouchStrip
beside it and select it by pressing the TouchStrip.
b. Press the Setup key.
c. Move the highlight to "QuickSets".
Step 2. Press on the TouchStrip.
The current QuickSet is highlighted, and displayed with an asterisk (*)
beside it. It is also displayed at the top left of the screen.
Step 3. Highlight the setting you want, and press on the TouchStrip to
Step 4. Exit the Setup menu.
to find this