– Press Setup on the front panel of the monitor.
– Select Operating Modes.
– Select Monitoring.
– Select Confirm.
You do not need a password to return to Monitoring Mode.
The Configuration Mode consists of three main elements; Quick Sets,
General Settings and Factory Default Sets.
The settings contained within Configuration Mode apply to the M3046A
Monitor, the M3000A Measurement Server and the M3015/16
Measurement Server Extensions. These settings are divided up into
four specific configuration groups called Quick Sets.
A QuickSet is a group of settings which has been defined and named in
the hospital. Four different QuickSets can be defined to match four
typical monitoring situations on your unit. To create a QuickSet you
can use either the current settings which you have on the monitor or
you can start from the most appropriate of the factory default sets and
make your own adjustments until all settings meet your requirements.