Troubleshooting Guide - Sunbeam Cafe Juice JE7600 Instruction Booklet

Troubleshooting Guide

Problem
Juicer will not start when speed
is selected.
The juicer motor appears to struggle
during operation.
You notice less juice coming
out of the juice spout.
Possible cause
The juicer hasn't been assembled
correctly.
Pulp container is full.
Pulp is caught in the
juicer cover.
Stainless steel blade and filtering
basket is blocked with excess pulp.
The selected juicing speed
is incorrect.
Large amounts of highly fibrous fruit
and vegetables have caused excess
pulp to build up in the filtering basket.
What to do
See 'Assembling your Cafe Juice™'
on page 7.
Empty the pulp container.
Stop juicing, remove the juicer cover
and clean out pulp. See 'Disassembling
your Cafe Juice™' and 'Care and
Cleaning' sections.
Try a slower juicing action – guide the
food pusher down the feed chute in a
slow downward motion.
After extended juicing of fibrous fruit
and vegetables the mesh on the
filtering basket may need to be cleaned.
Stop juicing, disassemble the juice
extractor and clean the filtering basket.
See 'Disassembling your Cafe Juice™'
and 'Care and Cleaning' sections.
See 'Juicing speed guide' on page 10.
Stop juicing, disassemble the juice
extractor and clean the filtering
basket. See 'Disassembling your Cafe
Juice™' and 'Care and Cleaning'
sections.
13