Playback of JPEG files
♦
Highlight an image with the navigation keys
ENTER
or PLAY/PAUSE
is displayed on the screen. The view then changes to the next
image on the disc or in the folder.
♦
To display the currently displayed image longer, press
PLAY/PAUSE
.
♦
To resume playback, press PLAY/PAUSE
♦
You can display an image directly by entering the file number
of the image using the numbers on the numeric keypad
confirming your selection with ENTER
♦
You can use the navigation keys
increments during playback.
♦
Use the navigation keys
vertically during playback.
♦
During playback, press the STOP button
nail preview of all images in the folder or on the disc. Each page
displays 12 thumbnails.
♦
Select an image with the navigation keys
playback with ENTER
or PLAY/PAUSE
♦
Use the navigation keys
following entries from the bottom of the menu and confirm with
.
ENTER
Slide Show: Starts a slide show of the images in the folder or on the
disc.
Menu:
Displays available button functions for JPEG playback.
Press ENTER
Goes back to the previous page
Previous:
Goes to the next page
Next:
♦
Press the MENU button
Select slide show transitions:
You can select different transitions to switch from one image to the
next.
♦
During the slide show, press the PROGRAM button
name of the desired transition appears in the upper left corner of
the screen.
│
GB │ IE │ NI
■
18
and press
to open the image. The image
again.
.
to rotate the image in 90°
to flip the image horizontally or
to display a thumb-
and start
.
to select one of the
until this overview is hidden.
to return to the file list
until the
Troubleshooting
No function in battery mode
–
The built-in battery may be discharged. Connect the mains
adapter
Display shows "No Disc" despite the fact that a disc has been
inserted
–
Check whether the disc has been inserted with the label side
facing up.
and
–
The disc is dirty, scratched or damaged. Clean the disc or insert
a different disc.
The remote control does not work
–
Check that the batteries have been inserted into the battery
compartment of the remote control C the right way round
(check the polarity).
–
Check whether the batteries of the remote control C are dis-
charged and replace both batteries if necessary.
–
Make sure that there are no obstacles between the remote
control C and sensor
–
Reduce the distance between the remote control C and the
DVD player A (max. 5 m).
No image on the second monitor
–
Check that all connecting cables between the
DVD player A and the second monitor B are firmly plugged
into the appropriate sockets.
–
Check whether the second monitor B is switched on
(ON/OFF switch
–
Check whether the screen
switched on (press the TFT OFF button
No sound
–
Check to see if the DVD player A is muted.
–
Check to see if the main volume control
or the car adapter
and charge the battery.
of the DVD player A .
is in the ON position).
of the second monitor B is
).
is set to minimum.
SPDP 18 A1