Contents 1 Important safety instructions Hearing Safety General information 2 Your Bluetooth in-ear headphones What's in the box Other devices Overview of your Bluetooth in-ear 3 Get started Charge your headphones Pair the headphones with your mobile 4 Use your headphones Connect the headphones to a Bluetooth device Manage your calls and music...
1 Important safety General information instructions To avoid damage or malfunction: Caution Hearing Safety Do not expose headphones to excessive heat Do not drop your headphones. Headphones shall not be exposed to dripping or splashing. Do not allow your headphones to be submerged in water.
Bluetooth and is compatible to the headphones (see 'Technical data' on page 7). Congratulations on your purchase, and welcome to Philips! To fully benefit from the Overview of your Bluetooth support that Philips offers, register your product in-ear headphones at www.philips.com/welcome.
Activate the Bluetooth feature of your the headphones off. mobile phone, select Philips UN102. Enter the headset password "0000" (4 zeros) if prompted. For those mobile Connect the supplied USB charging cable to: phones featuring Bluetooth 3.0 or higher,...
4 Use your Press and hold for 3 Turn the On/off, seconds. headphones music/call headphones off. The red control LED is on and fades out. Connect the headphones to a Bluetooth device Music control Operation Task Button Turn on your mobile phone/Bluetooth Play or pause On/off, Press once.
Page 8
Low battery level. The red LED flashes 2 times for every 3 seconds until it is out of power Battery is fully Red LED is off, and blue LED is on. charged.
5 Technical data Music time: 7 hours Talk time: 6 hours Standby time: 150 hours Normal time for a full charge: 2 hours Rechargeable lithium polymer battery (80 mAh) Bluetooth 5.0 Bluetooth mono support (Headset Profile - HSP, Hands-Free Profile - HFP), Bluetooth stereo supported (Advanced Audio Distribution Profile - A2DP;...
This transmitter must not be provisions of Directive 2014/53/EU. You can find co-located or operating in conjunction with any the Declaration of Conformity on other antenna or transmitter www.p4c.philips.com.
We strongly advise you to take your product to equipment. an official collection point or a Philips service centre to have a professional remove the Trademarks rechargeable battery.
Make sure the headphones are in pairing mode. AVRCP (see 'Technical data' on page 7). Follow the steps described in this user manual. For further support, visit www.philips.com/ Make sure that the LED light flashes blue support. and red alternately before you release the call/music button.
Page 14
Para maiores informações, consulte a site da ANATEL: www.anatel.gov.br Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding...