Initial Setup - Panasonic KX-UT133 Manual

*75+nnnn1
*76+nnnn1
*77+nnnn1
*78+nnnn1
*791
*792
*80
**80
*80+NST
*84+nnnn1
**84+nnnn1
*85
*86
*860
**86
*87
**87
*9+Project Number
Function codes for conference rooms during an active conference.
**
*2
*3
*5
*6
1)
nnnn is the four digit Service ID with leading zeros (0). For example, in a callgroup, IVR, eFax,
etc. This means: is the Service ID "1", "0001" must be entered when entering the function code.
3. Voicemail
3.1. Initial set-up
When accessing the voicemail system for the first time, you should also set up your personal
voicemail.
For more detailed information, please refer to the voicemail leaflet.
Press the voicemail key
Call group nnnn
Call announcement nnnn
Call queue nnnn
Call conference service nnnn
*791 - Access voice mail for this extension with password
*791158 - Access voice mail for extension 158, with the password for
158!
*11*791 - Transfer your calls to your voice mail
*11*791158 - Transfer your calls to the voice mail of the extension 158
Access voice mail entering extension number, e.g. for remote enquiry
Activate intercom
Deactivate intercom
Intercom to extension (EXT)
Become member of the queue with service ID nnnn
Leave queue with service ID nnnn
Echo extension
Block caller ID (CLIR)
Show main number as telephone number
Show telephone number incl.direct dial (CLIP)
Subscribe to Skill-set
Unsubscribe to Skill-set
Define a project number for outbound calls. (Note: The project number
is only valid for the very next outbound call)
Help
Activate or deactivate mute.
Express your needs.
Activate or deactivate mute of all participant.
Lock the conference.
on the Panasonic telephone to access the voice menu of the
17