Storage Use; Development; Sleep Timer; Firmware Upgrades - Philips GoGear PI5000316 User Manual

Storage use

In Storage use, check the storage that
applications occupy.
Battery use
In Battery use, check the battery use by
applications.

Development

In [Development], select options for your
development of Android applications.
[USB Allow the player to enter the
debugging] mode where the player can
communicate with the PC
through the USB cable.
[Stay Keep the screen switched on
awake] and unlocked during the USB
connection.
[Allow Make the location undetected
mock by the player.
location]
[Auto Allow the player to work as
mount USB mass storage when you
USB Mass connect the player to a PC.
Storage]
General

Sleep timer

Switch on the sleep timer. The Connect can
turn off automatically after a certain time
duration.
• In [Sleep timer], tap to select an option.
»
After the selected time duration, the
device is turned off automatically.

Firmware upgrades

In [Firmware upgrade], check for firmware
upgrades for Connect.
Make sure that you have connected Connect
to the Internet.

Registration

RegisterConnect
To register Connect with www.philips.
com/welcome, use an email address as your
account. Then, complete the registration
through the Web page link that you received
in the email.
1
Make sure that Connect is connected to
the Internet.
2
To register the Connect,
• Select [Registration] > [Register];
• Enter your valid email address;
»
You receive an email message
from ConsumerCare@Philips.com.
• On a computer, use the Web
page link in the email to complete
registration.
Check registration information
You can check whether you have registered
your Connect, whether you have completed
the registration on a computer, and what
account you have used for registration.
• Tap [Registration] > [Registration
information].
UnregisterConnect
To use another email address as your account
with www.philips.com/welcome, you can
unregister Connect.
1
Tap [Registration] > [Unregister].
2
Confirm as prompted.

Touch screen calibration

On Connect, you tap to select an option.
With the touch screen calibrated, your taps
can be precisely positioned on the display
screen.
1
Tap [Touch panel calibration] to start
calibration.
EN 57