Specifications; Installation; Ordering Information - Honeywell C7962B Product Data

Visible light flame detector
Table of Contents

Advertisement

C7962B VISIBLE LIGHT FLAME DETECTOR

SPECIFICATIONS

Model:
C7962B Visible Light Flame Detector.
Electrical Ratings:
Connections:
Two eight-foot (2.44 meters) color-coded NEC Class 1
leadwires.
Environmental Ratings:
Ambient Operating Temperature:
-40°F to +165°F (-40°C to +74°C)
Storage Temperature Rating:
-20°F to +120°F (-29°C to +49°C).
Humidity:
90% relative humidity, noncondensing.
Vibration:
0.5G.
Maximum Pressure Rating:
5 psi.
Mounting:
Collar with 1/2-14NPSM (internal thread) for mounting on a
1/2 inch sight pipe.
Dimensions:
See Fig. 1.
Accessory:
32007439-001 Mounting Bracket and screws. (Included with
C7962B1010)
118367A Swivel Mount.
130413 Conduit Clamp (included)
Approvals:
Underwriters Laboratories, Inc. listed: File No. MP268, Vol.
30, 31
Canadian Standards Association (CSA): 95329.

ORDERING INFORMATION

When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the
TRADELINE® Catalog or price sheets for complete ordering number.
If you have additional questions, need further information, or would like to comment on our products or services, please write or
phone:
1. Your local Honeywell Automation and Control Products Sales Office (check white pages of your phone directory).
2. Honeywell Customer Care
1885 Douglas Drive North
Minneapolis, Minnesota 55422-4386
In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Toronto, Ontario M1V 4Z9.
International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France,
Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.
65-0277—03
3-7/8 (98)
3-3/8 (86)
COLLAR WITH 1/2-14 NPSM
INTERNAL THREADS
C7962B
Fig. 1. C7962B Visible Light Flame Detector
dimensions in in. (mm).

INSTALLATION

WARNING
Electrical Shock Hazard.
Can cause serious injury, death or property
damage.
Disconnect power supply before beginning installation.
More than one disconnect may be required.
When Installing This Product...
1. Read these instructions carefully. Failure to follow them
could damage the product or cause a hazardous
condition.
2. Check the ratings given in the instructions and on the
product to make sure the product is suitable for your
application.
3. Installer must be a trained, experienced, flame
safeguard control technician.
4. After installation is complete, check out product
operation as provided in these instructions.
Disconnect the power supply before beginning installation to
prevent electrical shock and equipment damage. All wiring
must comply with applicable electrical codes, ordinances and
regulations. Use NEC Class 1 (line voltage) wiring.
2
8 FOOT
(2.44 METER)
LEADWIRES (2)
1
(25)
SPUD CONNECTOR
(1/2-14 NPSM
INTERNAL THREADS)
M29272

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C7962B and is the answer not in the manual?

Questions and answers

Table of Contents