5. DISASSEMBLY and REASSEMBLY
5-1 PREPARATIONS
and SUGGESTIONS
1) When disassembling the engine, remember well the locations of individual parts so that they can be reassembled cor-
, -
rectly. If you are uncertain of identifying some parts, it is suggested that tags should be attached to them.
2 ) Have boxes ready to keep disassembled parts by group.
3) To prevent missing and misplacing, temporarily assemble as much as possible each group or set of disassembled small
parts such as bolts and nuts, etc.
4) Carefully handle disassembled parts, and clean them with washing oil.
5) Use the correct tools in the correct way.
5-2 SPECIAL TOOLS
I
Tool No.
I
I
Tool
Use
I
228 95001 07
For pulling off the flywheel
Flywheel puller with bolt
I
22895002 07
1
Box wrench
For removing or fastening the
flywheel nut
I
228 95003 07
I
Piston ring expander
I
For placing piston ring
I
/
PISTON RING EXPANDER
\ B O X
WRENCH
Fig. 15
-
13
-