Cabling The Console Port - 3Com SuperStack II 10005622 Getting Started Manual

To cable a Gigabit Ethernet SC port:
Remove the dust covers and save them for future use.
1
Attach one male connector of the SC cable connector
2
pair to the right side of one of the Gigabit Ethernet
ports on the back panel.
Attach the remaining connector of the pair to the left
3
side of the same Gigabit Ethernet port.
To cable another Gigabit Ethernet port, repeat steps 1
4
through 3.
Figure 3-2 shows the Gigabit Ethernet cabling.
1000 Base SX
Pckt
Stat
SC connector
Fiber cables
Figure 3-2 Cabling the Fixed Gigabit Ethernet Port

Cabling the Console Port

Console
Cabling the Console Port
The Console port on the back panel provides local or
remote administration:
For Local Administration — The Console port
provides a DB-9 connection to a local terminal or
workstation that runs a terminal emulation
program and acts as the Console.
For Remote Administration — The Console port
provides a DB-9 connection for an external
modem, which you can use to connect your
current Administration Console session to a
modem.
3-5