General Advice - Beko METPOINT OCV Instructions For Installation And Operation Manual

3

General advice

Check, prior to reading the operating instructions, whether or not these instructions
correspond to the device.
Read these installation and operating instructions carefully prior to any intervention
regarding the METPOINT
operating pressure of 40 bar.
The operating instructions must be accessible at all times at the place of application of the
device.
To ensure safe operation, the device must only be operated and maintained in accordance
with the indications in the operating instructions. In addition, the national and operational
statutory provisions and safety regulations, as well as the accident prevention regulations
required for the respective case of application, need to be observed during employment.
This applies accordingly when accessories are used.
Non-observance of the installation and operating instructions involves risks for persons and
systems.
System performance tests, installation, setting and service measures must only be carried
out by authorised skilled personnel.
In the event of improper use of the METPOINT
systems with an operating pressure of 40 bar, or in the event of non-observance of these
instructions, warranty and liability claims are excluded.
If you have
TECHNOLOGIES GMBH.
This symbol stands for actions which can also be implemented by the operators, provided
that they are skilled and authorised accordingly.
Measurement accessories METPOINT® OCV 40 bar
®
OCV in the version for the measurement in systems with an
any queries regarding
®
OCV in the version for the measurement in
these instructions, please
General advice
contact BEKO
5