Table of Contents
Advertisement
Chapter 1. Overview
The 10/100/1000 Base-T Ethernet PCI Adapter is a 32/64-bit high-performance
expansion adapter card for systems adhering to the Peripheral Component Interconnect
(PCI) 2.1 and IEEE 802.3ab and 802.3u standards. The adapter connects the system to
an Ethernet LAN at a data rate of up to 1000 Mbps over CAT-5 UTP wiring for
distances up to 100 meters.
The 10/100/1000 Base-T Ethernet PCI Adapter provides the following features:
v 33MHz through 66MHz PCI bus speeds
v 4 LED adapter status indicators for data and 10, 100 and 1000 Mbps indicators
v Full-duplex operation
v 1MB on-card FIFO for transmit and receive
v RJ-45 UTP Connector for Category-5 Copper Cabling
v Surface mount technology (SMT) and pin-in-hole technology (PIH)
1
2
3
4
5
Figure 1. 10/100/1000 Base-T Ethernet PCI Adapter
1
2
3
4
5
RJ-45 Connector
Yellow LED (Data)
Green LED 1000 Mbps
Green LED 100 Mbps
Green LED 10 Mbps
1
Advertisement
Table of Contents
