Clock Functions - Electrolux EVY8840AA User Manual

Table of Contents

Advertisement

ate). For this feature to operate, the
cooking time must be longer than 30
minutes or you must use the clock
functions (Duration, End, Time delay).
– When the appliance is off, you can
use the heat to keep food warm. The

7. CLOCK FUNCTIONS

7.1 Clock functions
Symbol
If you set the time for a clock function, the
time starts to count down after 5 sec-
onds.
If you use the clock functions Du-
ration and End Time , the appli-
ance deactivates the heating ele-
ments after 90% of the set time.
The appliance uses the residual
heat to continue the cooking pro-
cedure until the time ends. The re-
sidual heat can last from 3 to 20
minutes.
Setting the clock functions:
1.
Set a heating function.
2.
Touch
display shows the necessary clock
function and the related symbol.
3.
Touch
time. Touch OK to confirm.
When the time ends, an acoustic sig-
nal sounds. The appliance deacti-
vates. The display shows a message.
4.
Touch a sensor field to stop the sig-
nal.
Useful information:
Function
To set a countdown (maximum: 2 hours, 30 mi-
nutes). This function has no effect on the operation
of the appliance. You can also activate it when the
Minute Minder
appliance is deactivated. Touch
function. Touch
OK to start.
To set the length of an operation (maximum: 23
Duration
hours, 59 minutes).
To set the switch-off time for a heating function
End Time
(maximum: 23 hours, 59 minutes).
again and again until the
or
to set the necessary
display shows the remaining temper-
ature.
• Cooking with the lamp off - Touch
and hold
for 3 seconds to deactivate
the lamp during cooking.
Description
or
to set the minutes and
• With Duration and End Time , the appli-
ance deactivates automatically.
• With Duration and End Time , you must
set the heating function and the tem-
perature first. Then you can set the
clock function.
• You can use Duration and End Time at
the same time if you want to automati-
cally activate and deactivate the appli-
ance at a given time later.
7.2 Extra Time
The Extra Time makes the heating func-
tion continue after the Duration ends.
• It is applicable for all heating functions
with Duration or Weight Automatic.
Activating the function:
1.
When the cooking time ends, an
acoustic signal sounds. Press a sen-
sor field.
2.
The display shows the message for
Extra Time for one minute.
3.
Press
to activate (or
4.
Set the Extra Time period. Press OK
to confirm.
ENGLISH
11
to activate the
to cancel).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Evy8840ao

Table of Contents