Energy Efficiency - Electrolux EOA5651BAK User Manual

Hide thumbs Also See for EOA5651BAK:
Table of Contents

Advertisement

Problem
The core temperature sen‐
sor does not operate.
It takes too long to cook
the dishes or they cook too
quickly.
Steam and condensation
settle on the food and in
the cavity of the oven.
The display shows "C2".
The display shows an error
code that is not in this ta‐
ble.
12.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

13. ENERGY EFFICIENCY

13.1 Product Fiche and information according to EU 65-66/2014
Supplier's name
Possible cause
The plug of the core tem‐
perature sensor is not cor‐
rectly installed into the
socket.
The temperature is too low
or too high.
You left the dish in the
oven for too long.
You want to start the Cat‐
alysis or Defrost function,
but you did not remove the
core temperature sensor
plug from the socket.
There is an electrical fault.
plate is on the front frame of the oven
cavity. Do not remove the rating plate
from the oven cavity.
.........................................
.........................................
.........................................
Remedy
Put the plug of the core
temperature sensor as far
as possible into the socket.
Adjust the temperature if
necessary. Follow the ad‐
vice in the user manual.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the
cooking process ends.
Remove the core tempera‐
ture sensor plug from the
socket.
• Deactivate the oven
with the house fuse or
the safety switch in the
fuse box and activate it
again.
• If the display shows the
error code again, con‐
tact the Customer Care
Department.
Electrolux
ENGLISH
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eoa5651bax

Table of Contents