1. Wi-Fi Kit 2.0 Installation
Wi-Fi Kit installation
∙ To ensure smooth operation, there should be no obstacle between the Wi-Fi Kit and wireless router
that may interfere with communication. When the Wi-Fi Kit is too far from a router or there are
potentially interfering elements between them, it may cause problems with the performance of the
Wi-Fi Kit that cannot be resolved by customer services.
∙ Place the Wi-Fi Kit in an area where you can easily press the AP button for device verification.
∙ Do not install the Wi-Fi Kit in an area where it may be exposed to moisture or impact.
∙ Operating temperature: 0 ~ 40 °C (32 ~ 104 °F), Operating humidity: 30-90 % (relative)
1. Use a flathead screwdriver to turn each of the square holes at the lower part of the Wi-Fi Kit and remove the
※ Push both latches at the same time.
∙ Use a flathead screwdriver to turn the square hole at the upper part of the fixing hook for
2. Arrange the power and communication cables along the back cover.
15cm (6 inch)
<Installation on the wall>
If necessary, remove
this part to secure
more space for wiring.
10cm (4 inch)
<Installation in the wall>